Heavy module selection and installation plan

In general, the selection of weighing modules mainly depends on the following points:

Point: Select according to the weighing program of the weighing module. At this time, we have to see the total weight of the material to be weighed by the steel pot on your weighing module. Generally, the range of the weighing module can be selected. 50% to 70% of this total weight. Generally, there are more column-selection modules for larger measuring ranges, and cantilever and bellows-type modules for smaller measuring ranges.

The second point: Choose according to the installation position of the weighing module. If you want to choose a better limit at the bottom of the weighing module you want to use at the construction site, it is generally sufficient to install the sensor directly at this time.

The third point: Choose according to the on-site environment of the weighing module. If the weighing module you purchase has corrosive gas or corrosive liquid, we must basically choose the weighing module of pure stainless steel. If the weighing module you purchase is If it is used in an explosion-proof environment, an explosion-proof weighing module must be selected.

Fourth point: Choose according to the working conditions of the weighing module. If the weighing module you purchase is used for vibration, you should choose the dynamic load weighing module. If it is used in a static state, you can choose the static load weighing module. Up.