You are here: Home » News » What's the unit of the law code on the balance

What's the unit of the law code on the balance

Views: 0     Author: Site Editor     Publish Time: 2022-09-22      Origin: Site

facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
kakao sharing button

◎Purpose of weights: used for the calibration of balances and scales

◎Tips for using weights: Before using the weights, use a cleaning brush and wiping cloth to clean off the dust and other stains on the surface of the weights.

It is strictly forbidden to touch the weight directly with your hands. When using weights, please wear gloves and use tools to hold the weights.

Before balance testing or weight comparison, weights need to be kept at a constant temperature to reach the atmospheric conditions of the laboratory, otherwise the test results will be affected.

After the weight is used, it must be stored in the original packaging box.

◎Weight specifications: package specifications: 1mg-500mg, 1mg-50g, 1mg-100g, 1mg-200g, 1mg-500g, 1mg-1kg, 1mg-2kg, 1mg-5kg, 1kg-2kg, 1kg-5kg, 10kg- 20kg (set weight accessories: aluminum box packaging, factory inspection certificate, non-marking wiping cloth, dust-proof gloves, anti-static cleaning brush, non-magnetic stainless steel tweezers (large), non-magnetic stainless steel tweezers (small))

Single weight: 1mg, 2mg, 5mg, 1g, 2g, 5g, 10g, 20g, 50g, 100g, 200g, 500g, 1KG, 2KG, 5KG, 10KG, 20KG, 25KG, 100KG, 200KG, 500KG, 1000KG, 2000KG , 5000KG

◎What is the unit of the law code on the balance?

Introduction of balance weights:

Structure: The weight can have an adjustment cavity, and the total volume of all adjustment cavities should not exceed 1/10 of the total volume of the weight. The cavity should be sealed, waterproof and dustproof. The adjustment cavity can be sealed with a threaded plug or knob.

Shape: Rectangular design shape, and it is required to have grooves for loading and unloading on both sides of the weights and handling grooves for forklifts at the bottom of the weights. The edges and corners of the weight should be rounded, and there should be no sharp edges or sharp corners and obvious blisters on the surface to prevent wear and dust accumulation. According to our drawing size.

Maintenance skills of balance weights: The warehouse where weights are placed should be clean and dry, and ensure a certain temperature and humidity. When weights are placed, the bottom should be padded with wood, and the upper part should be covered with cloth or film, and regular observation and records should be made. 

Mobile/WeChat/WhatsApp: +86 13186894933
Tel: +86 574-86902659
Fax: +86 574-86902656
QQ: 2223905992
Address: No.25-7 Gangxi Avenue, Baoshui District, Ningbo, China
 Ningbo Saintbond Intelligent Technology Co.,LtdAll Rights Reserved
Leave a Message
Contact Us