Availability: | |
---|---|
Quantity: | |
H6G
SAINTBOND
Short Description:
◎Alloy steel IP66 single point load cell;
◎Nickel plated;
◎Suitable for platform, belt and other electronic scales;
◎Maximum platform size: 600 x 600 mm;
Available models:
Capacity | Accuracy | Full article description |
xxkg | C3 | H6G-C3-xxkg-3B6 |
xxkg | C3 | H6G-C3-xxkg-3G6 |
Specification:
Accuracy class | C3 | |||
Output sensitivity(= FS) | mV/V | 2.0 ± 0.2 | ||
Maximum capacity (Emax) | 100,150,200,250,300,500,600kg | |||
Maximum number of load cell intervals (nLC) | kg | 3000 | ||
Ratio of minimum LC verification interval Y = Emax / Vmin | 10000 | |||
Combined error | %FS | ±0.020 | ||
Safe overload | of Emax | 150% | ||
Uitimate overload | of Emax | 300% | ||
Zero balance | %FS | ± 1.0 | ||
Excitation, recommended voltage | V | 5~12(DC) | ||
Excitation maximum | V | 18(DC) | ||
Input resistance | Ω | 384 ±4 | ||
Output resistance | Ω | 351 ±2 | ||
Insulation resistance | MΩ | ≥ 5000(50VDC) | ||
Compensated temperature | ℃ | -10~+40 | ||
Operating temperature | ℃ | -35~+70 | ||
Element material | Alloy steel, nickel plated | |||
lngress protection (according to EN 60529) | IP66 | |||
Recommended torque on fixation | N.m | 20 | ||
ATEX classification (optional) | Ⅱ1G Ex ia ⅡC T4 | Ⅱ1D Ex iaD 20 T73℃ | Ⅱ3G Ex nL ⅡC T4 | |
Note: S1" output sensitivity is 2.0±0.002m/V,input resistance is 384 ±4 |
Dimensions in mm:
Wiring:
◎Shielded, 6 conductor cable;
◎Standard cable length: 3m;
◎Transparent shield;
◎Cable type and cable length for customer's own application are available on request;
◎Shield not connected to element;
Short Description:
◎Alloy steel IP66 single point load cell;
◎Nickel plated;
◎Suitable for platform, belt and other electronic scales;
◎Maximum platform size: 600 x 600 mm;
Available models:
Capacity | Accuracy | Full article description |
xxkg | C3 | H6G-C3-xxkg-3B6 |
xxkg | C3 | H6G-C3-xxkg-3G6 |
Specification:
Accuracy class | C3 | |||
Output sensitivity(= FS) | mV/V | 2.0 ± 0.2 | ||
Maximum capacity (Emax) | 100,150,200,250,300,500,600kg | |||
Maximum number of load cell intervals (nLC) | kg | 3000 | ||
Ratio of minimum LC verification interval Y = Emax / Vmin | 10000 | |||
Combined error | %FS | ±0.020 | ||
Safe overload | of Emax | 150% | ||
Uitimate overload | of Emax | 300% | ||
Zero balance | %FS | ± 1.0 | ||
Excitation, recommended voltage | V | 5~12(DC) | ||
Excitation maximum | V | 18(DC) | ||
Input resistance | Ω | 384 ±4 | ||
Output resistance | Ω | 351 ±2 | ||
Insulation resistance | MΩ | ≥ 5000(50VDC) | ||
Compensated temperature | ℃ | -10~+40 | ||
Operating temperature | ℃ | -35~+70 | ||
Element material | Alloy steel, nickel plated | |||
lngress protection (according to EN 60529) | IP66 | |||
Recommended torque on fixation | N.m | 20 | ||
ATEX classification (optional) | Ⅱ1G Ex ia ⅡC T4 | Ⅱ1D Ex iaD 20 T73℃ | Ⅱ3G Ex nL ⅡC T4 | |
Note: S1" output sensitivity is 2.0±0.002m/V,input resistance is 384 ±4 |
Dimensions in mm:
Wiring:
◎Shielded, 6 conductor cable;
◎Standard cable length: 3m;
◎Transparent shield;
◎Cable type and cable length for customer's own application are available on request;
◎Shield not connected to element;