H3G
SAINTBOND
Short Description:
◎Nickel plated alloy steel IP67 “S” type load cell;
◎Tension and compression applications;
◎Suitable for hanging, hopper and other weighing devices;
◎Also available in imperial capacities and dimensions;
Available models:
Capacity | Accuracy | Full article description | Capacity | Accuracy | Full article description |
50kg | C3 | H3G-C3-50kg-6B | 500kg | C3 Excluded from OIML | H3G-C3-500kg-6B |
100kg | C3 | H3G-C3-100kg-6B | 1t | C3 Excluded from OIML | H3G-C3-1t-6B |
200kg | C3 | H3G-C3-200kg-6B | 2.5t | C3Excluded from OIML | H3G-C3-2.5t-6B |
250kg | C3 | H3G-C3-250kg-6B | 5t | C3 Excluded from OIML | H3G-C3-5t-6B |
7.5t | C3 Excluded from OIML | H3G-C3-7.5t-6B |
Specification:
Accuracy class | OIML R60 C3 | C3 | |||
Output sensitivity(= FS) | mV/V | 3.0 ± 0.008 | |||
Maximum capacity ( Emax ) | t | 0.05, 0.1, 0.25 | 0.5,1,2.5,5,7.5 | ||
Maximum number of load cell intervals (nLC) | 3000 | ||||
Ratio of minimum LC verification interval Y = Emax / Vmin | 15000 | 14000 | |||
Combined error | %FS | ±0.020 | |||
Minimum dead load | kg | 0 | |||
Safe overload | of Emax | 150% | |||
Ultimate overload | of Emax | 300% | |||
Zero balance | %FS | ±1.0 | |||
Excitation, recommended voltage | V | 5~12(DC) | |||
Excitation maximum | V | 18(DC) | |||
Input resistance | Ω | 430±60 | |||
Output resistance | Ω | 351±2.0 | |||
Insulation resistance | MΩ | ≥ 5000(50VDC) | |||
Compensated temperature | ℃ | -10~+40 | |||
Operating temperature | ℃ | -35~+65 | |||
Storagetemperature | ℃ | -40~+70 | |||
Element material | Nickel plated alloy steel | ||||
lngress protection (according to EN 60529) | IP67 | ||||
Recommended torque on fixation | N.m | M8:25 M12:75 M20:450 M24:750 | |||
ATEX classification (optional) | Ⅱ1G Ex ia ⅡC T4 | Ⅱ1D Ex iaD 20 T73℃ | Ⅱ3G Ex nL ⅡC T4 |
Dimensions in mm:
Dimension(mm) | L | H | H1 | W1 | W | H1 | M |
50-100kg | 50.8 (2.0) | 63.5 (2.5) | 10.16 (0.4) | 12.7 (0.5) | 16.5 (0.66) | 10.2 (0.40) | M8 |
250-500kg | 50.8 (2.0) | 63.5 (2.5) | 10.16 (0.4) | 19.05 (0.75) | 22.8 (0.90) | 10.2 (0.40) | M12 |
1t | 50.8 (2.0) | 63.5 (2.5) | 10.16 (0.4) | 25.4 (1.0) | 29.2 (1.14) | 10.2 (0.40) | M12 |
2.5t | 76.2 (3.0) | 101.6 (4.0) | 15.2 (0.6) | 25.4 (1.0) | 29.2 (1.14) | 15.2 (0.60) | M20×1.5 |
5t | 76.2 (3.0) | 101.6 (4.0) | 20 (0.79) | 25.4 (1.0) | 29.2 (1.14) | 20 (0.79) | M20×1.5 |
7.5t | 101.6 (4.0) | 139.7 (5.5) | 30 (1.18) | 31.75 (1.25) | 35.5 (1.40) | 31 (1.22) | M24×2 |
Wiring:
◎Shielded, 4 conductor cable;
◎ Cable diameter: Φ5mm;
◎Standard cable length: 6m;
◎Shield not connected to element;
Short Description:
◎Nickel plated alloy steel IP67 “S” type load cell;
◎Tension and compression applications;
◎Suitable for hanging, hopper and other weighing devices;
◎Also available in imperial capacities and dimensions;
Available models:
Capacity | Accuracy | Full article description | Capacity | Accuracy | Full article description |
50kg | C3 | H3G-C3-50kg-6B | 500kg | C3 Excluded from OIML | H3G-C3-500kg-6B |
100kg | C3 | H3G-C3-100kg-6B | 1t | C3 Excluded from OIML | H3G-C3-1t-6B |
200kg | C3 | H3G-C3-200kg-6B | 2.5t | C3Excluded from OIML | H3G-C3-2.5t-6B |
250kg | C3 | H3G-C3-250kg-6B | 5t | C3 Excluded from OIML | H3G-C3-5t-6B |
7.5t | C3 Excluded from OIML | H3G-C3-7.5t-6B |
Specification:
Accuracy class | OIML R60 C3 | C3 | |||
Output sensitivity(= FS) | mV/V | 3.0 ± 0.008 | |||
Maximum capacity ( Emax ) | t | 0.05, 0.1, 0.25 | 0.5,1,2.5,5,7.5 | ||
Maximum number of load cell intervals (nLC) | 3000 | ||||
Ratio of minimum LC verification interval Y = Emax / Vmin | 15000 | 14000 | |||
Combined error | %FS | ±0.020 | |||
Minimum dead load | kg | 0 | |||
Safe overload | of Emax | 150% | |||
Ultimate overload | of Emax | 300% | |||
Zero balance | %FS | ±1.0 | |||
Excitation, recommended voltage | V | 5~12(DC) | |||
Excitation maximum | V | 18(DC) | |||
Input resistance | Ω | 430±60 | |||
Output resistance | Ω | 351±2.0 | |||
Insulation resistance | MΩ | ≥ 5000(50VDC) | |||
Compensated temperature | ℃ | -10~+40 | |||
Operating temperature | ℃ | -35~+65 | |||
Storagetemperature | ℃ | -40~+70 | |||
Element material | Nickel plated alloy steel | ||||
lngress protection (according to EN 60529) | IP67 | ||||
Recommended torque on fixation | N.m | M8:25 M12:75 M20:450 M24:750 | |||
ATEX classification (optional) | Ⅱ1G Ex ia ⅡC T4 | Ⅱ1D Ex iaD 20 T73℃ | Ⅱ3G Ex nL ⅡC T4 |
Dimensions in mm:
Dimension(mm) | L | H | H1 | W1 | W | H1 | M |
50-100kg | 50.8 (2.0) | 63.5 (2.5) | 10.16 (0.4) | 12.7 (0.5) | 16.5 (0.66) | 10.2 (0.40) | M8 |
250-500kg | 50.8 (2.0) | 63.5 (2.5) | 10.16 (0.4) | 19.05 (0.75) | 22.8 (0.90) | 10.2 (0.40) | M12 |
1t | 50.8 (2.0) | 63.5 (2.5) | 10.16 (0.4) | 25.4 (1.0) | 29.2 (1.14) | 10.2 (0.40) | M12 |
2.5t | 76.2 (3.0) | 101.6 (4.0) | 15.2 (0.6) | 25.4 (1.0) | 29.2 (1.14) | 15.2 (0.60) | M20×1.5 |
5t | 76.2 (3.0) | 101.6 (4.0) | 20 (0.79) | 25.4 (1.0) | 29.2 (1.14) | 20 (0.79) | M20×1.5 |
7.5t | 101.6 (4.0) | 139.7 (5.5) | 30 (1.18) | 31.75 (1.25) | 35.5 (1.40) | 31 (1.22) | M24×2 |
Wiring:
◎Shielded, 4 conductor cable;
◎ Cable diameter: Φ5mm;
◎Standard cable length: 6m;
◎Shield not connected to element;