 |
| Quantity: | |
|---|---|
H2D
SAINTBOND
Short Description:
◎Alloy steel IP67 compression load cell；
◎Nickel plated；
◎Suitable for hopper and platform scales and other electronic devices；
◎Low profile；
Available models：
Capacity | Accuracy | Full article description |
5t | C2 | H2D-C2-5t-5J |
10t | C2 | H2D-C2-10t-5J |
20t | C2 | H2D-C2-20t-10J |
Specification：
Accuracy class | C2 | |
Output sensitivity(= FS) | mV/V | 2.0 ± 0.008 |
Maximum capacity ( Emax ) | MN | 5, 10, 20 |
Maximum number of load cell intervals ( nLC ) | 2000 | |
Ratio of minimum LC verification interval Y = Emax / Vmin | 5000 | |
Combined error | %FS | ±0.03 |
Safe overload | of Emax | 150% |
Ultimate overload | of Emax | 300% |
Zero balance | %FS | ±1.0 |
Excitation, recommended voltage | V | 5~12(DC) |
Excitation maximum | V | 18(DC) |
lnput resistance | Ω | 750±5 |
Output resistance | Ω | 700±5 |
Insulation resistance | MΩ | ≥ 5000(50VDC) |
Compensated temperature | ℃ | -10~+40 |
Operating temperature | ℃ | -35~+65 |
Element material | Nickel plated alloy steel | |
lngress protection (according to EN 60529) | IP67 |
Dimensions in mm：
Dimension(mm) Capacity(t) | L | D | D1 | M | H |
5 | 83 (3.27) | 128 (5.04) | 45 (1.77) | M24*2 | 8 (0.31) |
10 | 150 (5.91) | 160 (6.03) | 60 (2.36) | M39*2 | 30 (1.18) |
15 | 220 (8.66) | 200 (7.87) | 80 (3.15) | M60*2 | 60 (2.36) |
Wiring：
◎Shielded, 4 conductor cable: Φ5mm；
◎Standard cable length: 5m(5t,10t), 10m(20t)；
◎Cable type and cable length for customer's own application are available on request；
◎Shield not connected to element；
Short Description:
◎Alloy steel IP67 compression load cell；
◎Nickel plated；
◎Suitable for hopper and platform scales and other electronic devices；
◎Low profile；
Available models：
Capacity | Accuracy | Full article description |
5t | C2 | H2D-C2-5t-5J |
10t | C2 | H2D-C2-10t-5J |
20t | C2 | H2D-C2-20t-10J |
Specification：
Accuracy class | C2 | |
Output sensitivity(= FS) | mV/V | 2.0 ± 0.008 |
Maximum capacity ( Emax ) | MN | 5, 10, 20 |
Maximum number of load cell intervals ( nLC ) | 2000 | |
Ratio of minimum LC verification interval Y = Emax / Vmin | 5000 | |
Combined error | %FS | ±0.03 |
Safe overload | of Emax | 150% |
Ultimate overload | of Emax | 300% |
Zero balance | %FS | ±1.0 |
Excitation, recommended voltage | V | 5~12(DC) |
Excitation maximum | V | 18(DC) |
lnput resistance | Ω | 750±5 |
Output resistance | Ω | 700±5 |
Insulation resistance | MΩ | ≥ 5000(50VDC) |
Compensated temperature | ℃ | -10~+40 |
Operating temperature | ℃ | -35~+65 |
Element material | Nickel plated alloy steel | |
lngress protection (according to EN 60529) | IP67 |
Dimensions in mm：
Dimension(mm) Capacity(t) | L | D | D1 | M | H |
5 | 83 (3.27) | 128 (5.04) | 45 (1.77) | M24*2 | 8 (0.31) |
10 | 150 (5.91) | 160 (6.03) | 60 (2.36) | M39*2 | 30 (1.18) |
15 | 220 (8.66) | 200 (7.87) | 80 (3.15) | M60*2 | 60 (2.36) |
Wiring：
◎Shielded, 4 conductor cable: Φ5mm；
◎Standard cable length: 5m(5t,10t), 10m(20t)；
◎Cable type and cable length for customer's own application are available on request；
◎Shield not connected to element；
