Correct use method portable dynamic electronic axle load scale

Portable axle load meters are generally used in high-speed traffic police squadrons. Its advantages are light and easy to carry, simple and convenient to use. It is a good helper for high-speed traffic police to check whether passing vehicles are overloaded. The portable portable axle load meter (also known as the portable axle load scale) uses a high-strength aluminum alloy weighing platform, which is sturdy and durable, and its protection performance reaches the IP 67 level requirement. Ultra-thin steel sensor, compact structure, anti-eccentric load, strong overload capacity. Portable dynamic electronic axle load scale with AC and DC dual purpose, integrated display and printing, convenient and fast. So, for such a convenient weighing equipment, how do we use it correctly? Let's look at them one by one below.

Portable axle load meter

Preliminary preparations and precautions for use of the portable dynamic electronic axle load scale (portable axle load scale):

1. To use after long-term storage, it must be fully charged before use.

2. Place the countertop on a stable place, place the rubber ramp and connect the countertop with the instrument interface.

3. Open the on/off key of the instrument panel.

4. The weighing control instrument self-checks and automatically resets to zero, then it can be used normally.

Static weighing method: After installing the loadometer, drive at a constant speed. The first row of wheels of the car is parked on the weighing platform, and then the weight is recorded. The second row of wheels is driven up and stopped on it, and the weight is recorded, then the third row. , The fourth row and so on. Add all the weights you wrote down to get the weight of the entire car.

a) Automatically reset to zero when power on, if there is a margin, please press the zero key.

b) The vehicle enters normally, and the front axle stops on the metering table.

c) Press the print key to print out the weight of the front axle.

d) The vehicle moves in normally, and the rear axle stops on the metering table.

e) Press the print key to print out the weight of the rear axle.

f) Press the accumulation key to print out the total weight.

g) Vehicle used.

Dynamic weighing method: After installing the portable dynamic electronic axle load scale, the tested car is driven at a constant speed of 5kh/h, and the weight of the car is displayed on the weighing display of the portable platform scale. It can be printed out by pressing the print button. Weigh the data.

a) Automatically reset to zero when power on, if there is a margin, please press the zero key.

b) Press the * key, the lower left corner of the display shows the word HOLD.

c) Vehicles are limited to 10km/h. d) The printer automatically prints the weight of the front axle and the rear axle.

e) Press the accumulation key to print out the total weight.

As an electronic platform weighing equipment, the portable dynamic electronic axle load scale has played an irreplaceable role in many occasions. As the first choice for large-tonnage mobile weighing equipment, it has won many industries (highway systems, storage centers, inspection agencies, etc.) )’S recognition and love. But no matter how good the product is, in the end we must use it correctly in order to exert its best effect and effect. I hope that through the study of this article, I can master the correct use of the portable hand-held axle load meter.