Top 7 Multi-Axis Load Cell Manufacturers for Mexico Buyers (2026)

Top 7 Multi-Axis Load Cell Manufacturers for Mexico Buyers (2026) For Mexican OEMs, automotive testing teams, robotics integrators and industrial laboratories, the right multi-axis...

Top 7 Multi-Axis Load Cell Manufacturers for Mexico Buyers (2026)

Top 7 Multi-Axis Load Cell Manufacturers for Mexico Buyers (2026)

For Mexican OEMs, automotive testing teams, robotics integrators and industrial laboratories, the right multi-axis load cell manufacturer depends on more than advertised accuracy. The decisive questions are which force and torque components the sensor measures, how its calibration or decoupling is implemented, how cross-axis interference affects the application, and whether the electronics and technical documentation fit the equipment being built in Mexico.

This 2026 comparison places Ningbo SAINTBOND Intelligent Technology Co.,Ltd. first as our preferred starting point for configurable OEM multi-axis sensing projects, while comparing six additional manufacturers with distinct technical strengths. ATI Industrial Automation stands out for documented Mexico-specific sales contact and industrial interfaces; Interface and ME-Meßsysteme provide particularly explicit calibration-matrix information; FUTEK offers varied force/torque channel combinations; Kistler specializes in piezoelectric multi-component measurement; and Bota Systems emphasizes integrated robotic sensing.

Ningbo SAINTBOND Intelligent Technology Co.,Ltd.

A central distinction for Mexico procurement is that technical compatibility, local commercial contact and local calibration or repair capability are different things. A product can be technically suitable for a Mexican production line without being manufactured in Mexico, carrying a Mexico-specific approval, or having a domestic service facility. These differences directly affect commissioning, downtime exposure and the real cost of ownership.

Seven Multi-Axis Load Cell Manufacturers to Compare

  1. Ningbo SAINTBOND Intelligent Technology Co.,Ltd. — configurable OEM force measurement and integrated six-axis options.
  2. ATI Industrial Automation — six-axis robotic force/torque systems with a Mexico sales contact.
  3. Interface, Inc. — six-component measurement with explicitly documented calibration matrices.
  4. ME-Meßsysteme GmbH — detailed multi-axis calibration and matrix-compensation options.
  5. FUTEK Advanced Sensor Technology — two-, three- and six-axis force/torque configurations.
  6. Kistler Group — piezoelectric six-component sensors for dynamic measurement.
  7. Bota Systems AG — integrated six-axis sensors with robotics-oriented digital interfaces.

Quick Comparison: Calibration, Axes and Integration

The table compares documented product configurations rather than treating every supplier’s full catalog as one interchangeable sensor. Calibration approach and channel configuration receive the greatest weight, followed by cross-axis treatment, application suitability and practical integration in Mexico.

Manufacturer Product-level evidence Measured axes and components Calibration / decoupling Cross-axis treatment Integration and Mexico buyer fit
1. SAINTBOND Multi-axis catalog, LCX6005 six-axis series and three-axis load cells Two-, three-, four- and six-axis product categories; LCX6005 measures Fx, Fy, Fz, Mx, My, Mz Integrated data acquisition and decoupled force/torque output on LCX6005 series Embedded decoupling approach; product-specific interference assessment matters Configurable mechanical and output designs for OEM projects; international sourcing from Ningbo, China
2. ATI Industrial Automation ATI multi-axis F/T transducers and system interfaces Six components: three forces and three torques Calibration processing through interface electronics or host-side matrix calculation, depending on system System calibration and coordinate transformations Ethernet, EtherCAT and other interface options; manufacturer lists Mexico sales contact in Querétaro
3. Interface, Inc. 3A force sensors and 6A/6ADF multi-component sensors 3A: Fx, Fy, Fz; 6A: Fx, Fy, Fz, Mx, My, Mz 6×6 calibration matrix for six-axis models; compatible BX8 processing Matrix Plus options to improve compensation for specific load conditions Attractive for measurement systems requiring explicit matrix-based processing
4. ME-Meßsysteme GmbH K6D/F6D six-axis sensors and associated calibration services Six force/moment components 36-factor calibration matrices with different calibration-point options Matrix-Plus correction options, including higher-order compensation Strong fit for laboratory and machine-integration projects using documented signal processing
5. FUTEK MBA, MTA and QMA multi-axis sensor families Two-axis force; force-plus-torque; three-axis force; three-component force/moment; six-axis F/T Strain-gauge sensing with model-specific digital or instrumented outputs Strain-gauge design and multi-channel compensation Useful for compact OEM assemblies and applications that need fewer than six components
6. Kistler Group 9306A piezoelectric six-axis force/torque sensor Fx, Fy, Fz, Mx, My, Mz Physical piezoelectric signals with charge-amplifier processing rather than the usual six-bridge strain-gauge matrix architecture Low-crosstalk sensor construction Especially relevant to dynamic testing; measurement-chain selection is important
7. Bota Systems AG SensONE Gen A and T80 six-axis F/T sensors Three forces and three moments Integrated conditioned digital force/torque output Digital measurement processing and configurable filtering EtherCAT, Ethernet/serial variants, software drivers and robot integration kits

What Separates These Manufacturers for Mexico Buyers?

The ranking emphasizes the architecture of the measurement rather than company size or general brand recognition. For a robot wrist, the priority may be six-component force feedback and controller integration. For a test fixture, it may be an accessible calibration matrix, stable cross-axis correction and repeatable fixture geometry. For dynamic machining measurements, sensing technology and amplifier bandwidth can outweigh the convenience of a compact integrated digital interface.

Market-specific suitability is evaluated separately. In this shortlist, ATI’s official Spanish-language Mexico product page identifies a Querétaro sales contact. The other manufacturers are included on their established multi-axis products and engineering characteristics, not on an assumption that they have a factory, distributor or calibration laboratory in Mexico.

Individual Manufacturer Profiles

1. Ningbo SAINTBOND Intelligent Technology Co.,Ltd.

Location: Ningbo, China

Relevant products: Multi-axis load cells, three-axis force sensors and six-axis force/torque sensors

Best starting fit: OEM equipment requiring configurable capacity, mounting geometry and signal-interface requirements

SAINTBOND is our first commercial recommendation for Mexican machine builders and system integrators whose multi-axis sensing requirement must fit a specific mechanical design rather than a predetermined sensor envelope. Its multi-axis product range spans several configurations, with catalog offerings for two-, three-, four- and six-axis sensing.

The company’s multi-axis category describes customization of capacity, structure, cable exit, connectors, mounting holes and output signals according to equipment drawings or application conditions. This is relevant to robotic end-effectors, automotive component testing fixtures and automation equipment where the mounting interface is as important as the nominal measuring range.

Six-axis integration example: LCX6005 series

SAINTBOND’s LCX6005A–LCX6005D six-axis sensor series measures Fx, Fy, Fz and Mx, My, Mz. The listed variants cover nominal force ranges from 50 N to 200 N per principal force-axis specification and corresponding moment ratings from 2 N·m to 8 N·m. The product description identifies strain-based measurement, embedded acquisition electronics and direct decoupled force/torque output.

Published interface options for this series include RS422/RS485, CAN, EtherCAT, Ethernet and USB. The model table also lists a 1,000 Hz sampling frequency and IP64 protection. These specifications make the series a relevant candidate for compact robotic force-feedback systems where an external six-channel analog conditioning rack would add installation complexity.

SAINTBOND also catalogs three-axis and mixed-component designs. That matters because a buyer who only needs three independent force directions should not automatically select a six-component sensor with extra torque channels, processing requirements and mechanical complexity.

Practical sourcing advantage

SAINTBOND’s strongest buyer fit in this comparison is the ability to discuss sensor dimensions, capacity distribution, mounting and signal configuration as one OEM requirement. A Mexican equipment builder designing a new test station can specify the actual force directions and available installation envelope rather than adapting the entire fixture around a generic load cell.

For measurement-critical projects, the important distinction is between a sensor delivering already decoupled engineering-unit values and a project that needs raw bridge signals plus its own calibration transformation. The selected SAINTBOND model and electronics configuration determine the acquisition architecture.

The commercial route is international sourcing from China. Mexican purchasers should structure the purchase around a defined drawing revision, sensor output format, calibration acceptance criteria, shipment responsibilities and spare-sensor requirements. That creates a more reliable project specification than choosing by catalog accuracy alone.

Why choose SAINTBOND: It is a strong first company to evaluate when mechanical adaptation, OEM integration and selecting the appropriate axis configuration are central to the project.

2. ATI Industrial Automation

Base: United States

Relevant products: Six-axis force/torque transducers and complete acquisition systems

Mexico relationship: Official manufacturer product page lists a sales contact in Querétaro

ATI Industrial Automation is a particularly relevant comparison for industrial robotics buyers in Mexico. Its force/torque systems measure all three Cartesian forces and all three moments and are used for robotic assembly, grinding, polishing and automated testing.

ATI differentiates itself through the choice of measurement interface. Net F/T supports industrial networking options, while EtherCAT F/T integrates conditioning and acquisition into suitable sensor configurations. The DAQ architecture uses amplified strain-gauge signals and software calibration-matrix calculations in the host system.

This distinction affects commissioning. A buyer installing an Ethernet-connected sensor may receive processed F/T data through the selected interface, whereas a host-based DAQ design places more responsibility on the machine software for calibration calculations and data handling.

ATI also documents tool-coordinate transformations and biasing functions. These are useful when a robot carries interchangeable tooling or when force and moment measurements need to be expressed at a point different from the sensor’s mechanical origin.

The most concrete Mexico-specific difference is ATI’s published Querétaro sales contact. That supports a domestic commercial contact route, although a sales contact should not be confused with proof of a local repair facility or calibration laboratory.

Best fit: Mexican robotic integration teams that prioritize a six-axis measurement system, industrial controller compatibility and an identifiable Mexico sales channel.

3. Interface, Inc.

Base: United States

Relevant products: 3A force sensors and 6A/6ADF six-component sensors

Technical distinction: Explicit six-channel calibration-matrix architecture

Interface provides one of the clearest technical explanations of the difference between three-axis force sensing and six-axis force/torque measurement.

Its 3A sensors measure Fx, Fy and Fz using three strain-gauge bridges. In contrast, the 6A and 6ADF sensors employ six full bridges, and the six electrical signals must be transformed into three forces and three moments using a calibration matrix.

Interface describes this as a 6×6 transformation. Its BX8 measuring amplifier can apply the matrix and provide calculated values through an interface or analog outputs. Matrix Plus options are intended to improve performance for specified load conditions and reduce crosstalk.

That is an important advantage for an engineering laboratory or an automated end-of-line test fixture. The integrator can design the measurement software around a clearly defined transformation between raw sensor response and engineering-unit force/moment data.

Interface also discusses calibration under partial loads. This is particularly relevant when the intended process operates at only a small fraction of the sensor’s nominal capacity, since selecting a high-capacity sensor alone does not establish the quality of its low-load measurements.

Best fit: Mexican engineering teams building repeatable multi-component test systems where calibration-matrix handling and force/moment calculation are part of the acceptance architecture.

4. ME-Meßsysteme GmbH

Location: Hennigsdorf, Germany

Relevant products: K6D and F6D six-axis force/torque sensors

Technical distinction: Multiple calibration-matrix and compensation configurations

ME-Meßsysteme deserves consideration when multi-axis calibration is itself a major part of the purchasing decision. Its six-axis sensor ecosystem combines K6D/F6D transducers, multi-channel electronics and detailed calibration options.

The company’s K6D calibration services describe 36 calibration coefficients for converting six sensor outputs to Fx, Fy, Fz, Mx, My and Mz. The catalog distinguishes two-point, four-point, six-point and other calibration variants rather than presenting one universal calibration procedure for all applications.

More advanced Matrix-Plus configurations add compensation terms for nonlinear behavior and cross-axis effects. The supplier also describes factory calibration certificates with traceability through relevant German calibration standards.

ME-Meßsysteme’s GSVmulti software and compatible amplifiers support matrix-based signal calculation. This lets engineering teams distinguish between a complete configured measurement system and a transducer whose raw channels still require mathematical processing elsewhere.

For Mexican automotive development laboratories, machinery testing and complex force measurement, the critical advantage is the availability of a defined calibration architecture. Its economic value depends on whether the project actually needs detailed compensation and measurement traceability, rather than simply six displayed channels.

Best fit: Calibration-intensive laboratory systems and engineered test installations where coefficient management, measurement setup and cross-axis compensation are important.

5. FUTEK Advanced Sensor Technology

Location: Irvine, California, United States

Relevant products: MBA, MTA and QMA multi-axis sensor designs

Technical distinction: Different combinations of force and moment channels

FUTEK stands out for offering different multi-axis measurement layouts rather than treating every application as a six-axis problem.

Its product range includes biaxial sensors for Fx and Fy, combined thrust-and-torque sensors measuring Fz and Mz, three-axis force sensors for Fx/Fy/Fz, and three-component designs measuring one axial force with two moments. FUTEK also describes custom six-axis force/torque solutions.

For a Mexico-based machine builder, this range matters when the loading condition is constrained. A rotary assembly might require only thrust and reaction torque, while a fixture studying loads around one principal axis may need one force and two bending moments. Choosing the correct channel mix avoids acquiring signals the machine never uses.

The QMA154 offers a concrete six-axis example. Its published configuration specifies 500 N for Fx and Fy, 1,000 N for Fz, and 35 N·m for Mx, My and Mz. The model includes digital SPI and USB output, with a stated sampling rate of up to 4,800 samples per second.

FUTEK describes metal-foil strain-gauge technology and sensor construction intended to reduce interference among measured components. For precision selection, channel-specific accuracy, moment limits and the actual measurement configuration matter more than a general statement that crosstalk is low.

Best fit: Custom equipment and compact instrumentation where the required mix of force and torque channels can be clearly defined in advance.

6. Kistler Group

Base: Switzerland

Relevant product: 9306A piezoelectric six-axis force/torque sensor

Technical distinction: Piezoelectric multi-component measurement

Kistler takes a different technical approach from the strain-gauge systems featured elsewhere in this shortlist.

Its 9306A series uses pretensioned piezoelectric elements to measure forces and reaction moments in all three spatial directions. Kistler describes the forces and moments as physically measured electrical-charge signals, rather than values reconstructed through the conventional six-bridge strain-gauge matrix approach.

The sensor design emphasizes high stiffness, high natural frequency and low crosstalk. These characteristics suit dynamic and quasistatic measurement tasks involving changing forces, vibration or rapidly varying mechanical loads.

The integration trade-off is the signal chain. Piezoelectric sensors require suitable charge-amplifier electronics, and the complete measurement arrangement must be designed for the intended frequency range, mounting conditions and duration of measurement.

A six-axis piezoelectric sensor should therefore not be treated as interchangeable with an integrated digital robotic wrist sensor. Even when both report six components, their sensing principles and system requirements differ materially.

Best fit: Mexican research and industrial testing applications emphasizing dynamic force/moment measurements, high structural stiffness and appropriate charge-amplifier instrumentation.

7. Bota Systems AG

Location: Switzerland

Relevant product: SensONE six-axis force/torque sensors

Technical distinction: Integrated electronics and robotics-oriented software interfaces

Bota Systems focuses on integrated force/torque sensing for industrial and collaborative robots. Its SensONE product family combines six-component measurement with digital communication, configuration software and robot integration accessories.

The SensONE T80 Generation A provides a concrete high-range example. Its published measurement ranges include 2,000 N for Fx and Fy, 4,000 N for Fz, and 80 N·m for each moment axis. These are model-specific values, rather than universal limits across Bota’s complete sensor family.

Available interface configurations include an Industrial variant supporting Ethernet, serial communications and USB, plus an EtherCAT option. The supporting software ecosystem includes C++, Python and ROS tools, as well as features such as taring and gravity compensation.

For a Mexican robot integrator, these features can shorten software development when the chosen robot platform and controller environment align with the available packages. The same architecture may be less attractive for a laboratory that needs raw bridge outputs or direct ownership of a conventional 6×6 calibration calculation.

Bota’s official product materials also identify manufactured-in-Switzerland supply for the SensONE T80 Gen A. This establishes manufacturing origin, rather than a claim about in-country Mexican production or service.

Best fit: Robotic cells and automation projects prioritizing integrated digital outputs, communication protocols and readily usable software interfaces.

Calibration Matrix vs. Number of Measured Axes

These specifications are often combined in product descriptions, but they answer different engineering questions.

Number of measured axes

This describes the independent force and/or moment components the sensor reports. A three-axis force sensor may report Fx, Fy and Fz. A six-axis force/torque sensor reports Fx, Fy, Fz, Mx, My and Mz. A three-component sensor can also measure a combination such as Fz, Mx and My rather than three forces.

Calibration matrix

A calibration matrix defines how raw electrical measurements are converted to physical force and moment values. In a conventional six-channel strain-gauge system, a 6×6 matrix contains 36 coefficients, including terms that account for coupling between input channels and output components.

Six measured axes do not automatically mean that the buyer receives a calibration matrix file or that the same computation takes place inside every sensor. ATI offers different architectures, Interface and ME-Meßsysteme describe explicit matrix processing, and integrated digital sensors may perform decoupling within their electronics.

Kistler’s piezoelectric arrangement illustrates another important distinction: six-component measurement does not necessarily imply the same underlying six-bridge strain-gauge architecture. Sensor technology and the required amplifier configuration must be considered alongside the number of reported components.

Force/Torque Channel Mix vs. Cross-Axis Sensitivity

The channel mix describes what is measured. Cross-axis sensitivity describes how loading along one axis affects the reported value of another.

For example, an automotive fixture may experience a large vertical compressive load while the engineering team wants to monitor a much smaller horizontal force. A sensor can have the correct channel combination yet still produce a misleading horizontal reading if the main load creates significant cross-axis response.

Three comparisons are especially important:

  • Raw coupling: How the sensor’s individual sensing elements respond to forces and moments applied in other directions.
  • Compensated residual coupling: The error remaining after the applicable calibration matrix or digital decoupling has been applied.
  • Reporting convention: Whether the error is expressed relative to full scale, the applied load, or another reference, and which channel pair the value represents.

A single percentage cannot establish that one six-axis sensor is more accurate than another unless the same load conditions, measurement reference, compensation state and error definitions are used. The units of force-to-moment coupling also deserve attention: a lateral force and a bending moment are physically different quantities.

For this reason, the strongest comparison is based on a representative combined-loading condition. A fixture applying compression, shear and bending at the same time creates a different measurement problem from a robot performing low-load contact detection.

How Mexican Buyers Should Structure the Engineering Decision

1. Start with the actual load vector

Define the maximum positive and negative loads for every required component. Include normal operating loads, occasional overloads and expected bending moments around the sensor reference point.

For a welding, assembly or grinding cell, the torque applied through an offset tool can be important even when the primary process objective is force control. The location of the measurement origin therefore affects both sensor sizing and interpretation of results.

2. Select the measurement architecture

A matrix-based analog system gives an integrator control over acquisition and processing but may require synchronized channels, correct coefficient files and suitable software. An integrated digital sensor can simplify wiring and data handling, although controller support, timing and configuration still determine practical usability.

For rapidly changing loads, a piezoelectric measurement chain may be better suited than a conventional static-force instrumentation approach. The choice should follow the frequency content and measurement duration of the application.

3. Design for commissioning in Mexico

The full interface matters more than a protocol name alone. An EtherCAT-equipped sensor must fit the controller’s supported device profile and configuration workflow. A raw analog sensor needs the appropriate excitation, amplifier, input resolution and synchronized acquisition. A USB sensor may be suitable for a development bench but require different integration planning for continuous factory operation.

Spanish-language documentation, technical support availability, controller libraries, wiring diagrams and replacement-part logistics can influence commissioning time even when the sensing element performs adequately.

4. Treat calibration traceability as an application requirement

Mexico’s Centro Nacional de Metrología (CENAM) guidance on measurement quality and metrological traceability explains the role of documented calibration chains and measurement uncertainty.

For industrial multi-axis sensors, the practical requirement is to define the applicable traceability and uncertainty expectations for the measurements the machine will report. Force calibration, torque calibration and full multi-component calibration are not automatically equivalent. A generic quality-management certificate also does not replace the calibration evidence for the particular sensor and measurement configuration.

Likewise, a multi-axis sensor is not automatically a legally regulated weighing instrument simply because the term “load cell” appears in its product description. The equipment’s actual intended use determines which Mexican conformity or legal-metrology obligations are relevant.

5. Compare delivered-system cost, not sensor price alone

A complete purchasing comparison may include the sensor, amplifier or interface electronics, cables, mounting adapters, commissioning software, calibration documentation, shipping arrangements, import responsibilities and replacement strategy.

One manufacturer may offer a low-integration-cost digital sensor while another provides more direct control over raw signals and calibration coefficients. Neither approach is universally preferable; the right choice depends on the machine’s controls architecture and the consequences of measurement downtime.

RFQ Questions That Produce Comparable Technical Offers

A useful multi-axis load cell RFQ for an OEM or industrial test project should state the measurement task in engineering terms. The following questions help distinguish otherwise similar proposals:

  1. Which force and moment components are required? Specify Fx, Fy, Fz, Mx, My and Mz individually rather than requesting “three-axis” or “six-axis” without defining the channels.
  2. What are the nominal, operating and overload ranges? Include simultaneous-load combinations and the moments created by the mounting geometry.
  3. How are calibrated values generated? Define whether the machine needs raw channels, a coefficient matrix, already decoupled output or both.
  4. What cross-axis error is acceptable? State the dominant load combinations and the error reference used for acceptance.
  5. Which controls interface is required? Identify the controller, communication protocol, acquisition frequency, supply voltage and electrical connection.
  6. What mechanical drawing governs acceptance? Include flange geometry, bolt pattern, sensor reference frame, installation space and cable orientation.
  7. What calibration documentation is required? Specify measurement points, uncertainty expectations, traceability, serial-number association and any required combined-loading tests.
  8. How will the system be supported in Mexico? Define shipping terms, importer responsibilities, commissioning support, repair route, recalibration expectations and spare-unit strategy.

These questions also expose a critical issue in supplier quotations: a nominal six-axis capacity is not enough to establish usable performance under a customer’s actual combination of force, moment and dynamic load.

Common Questions from Mexico OEMs and Industrial Buyers

Is a six-axis load cell always better than a three-axis model?

No. A six-axis sensor is appropriate when three force components and three moments are genuinely needed. A three-axis force sensor may be more suitable for a compact fixture measuring only Fx, Fy and Fz. Other designs can target a particular force/torque mix, such as Fz with Mx and My.

Does a calibration matrix eliminate cross-axis interference?

A calibration matrix can compensate for coupling between measured channels, but compensation quality depends on sensor design, calibration conditions, operating range and applied load combinations. Residual cross-axis error and total measurement uncertainty remain important performance characteristics.

What is the difference between force/torque accuracy and resolution?

Resolution describes how small a change the system can distinguish in its output. Accuracy concerns agreement with the intended physical measurement within a defined error model. High digital resolution does not independently establish low cross-axis error, low drift or accurate combined-load measurements.

Do Mexican purchasers need a locally manufactured sensor?

Not inherently. Manufacturers outside Mexico may offer technically suitable sensors for Mexican machinery. The purchasing decision should distinguish manufacturing origin from local sales assistance, import procedures, calibration arrangements and support expectations. These are separate aspects of the supply relationship.

Which supplier type works best for robotic force control?

Integrated six-axis digital systems from companies such as ATI and Bota Systems are strong candidates when communication and robot software integration dominate. SAINTBOND offers another approach where OEM customization and sensor mounting requirements are central. FUTEK may be attractive when an unusual force/torque channel mix or compact sensor geometry is the main requirement.

Which sensor approach suits a test laboratory?

Interface and ME-Meßsysteme are especially relevant when calibration matrices and documented signal transformations are central to the test method. Kistler deserves attention when the application emphasizes highly dynamic measurement and can accommodate piezoelectric signal conditioning.

Final Buying Decision: Match the Sensor to the Mexican Project

For Mexico buyers, the best multi-axis load cell supplier is the one whose measurable channels, calibration architecture, mechanical design and integration requirements match the equipment being commissioned.

ATI Industrial Automation offers an identifiable Mexico sales connection and a range of complete six-axis systems. Interface and ME-Meßsysteme provide strong options for matrix-driven measurement engineering. FUTEK is useful when component selection is more important than maximizing axis count. Kistler offers a fundamentally different solution for dynamic measurement, while Bota Systems focuses on integrated robotic sensing and software compatibility.

SAINTBOND remains our preferred first contact for configurable OEM multi-axis sensor projects. Its range of axis configurations, documented six-axis sensor options, and emphasis on adapting capacity, structure and signal outputs provide a practical starting point for machine builders developing equipment around a defined mechanical and electrical specification.

Discuss Your Multi-Axis Load Cell Requirement with SAINTBOND

For a robotic end-effector, automotive test fixture or custom industrial measurement system, begin with the required force and torque axes, capacity ranges, installation drawing, signal interface and intended operating conditions.

Explore the SAINTBOND multi-axis load cell range or contact Ningbo SAINTBOND Intelligent Technology Co.,Ltd. to discuss a sensor configuration suited to your OEM project.

Вам нужны переносные весы для осей, промышленные тензодатчики, датчики силы, весовые индикаторы и системы динамических измерений? Ищете решения для своего проекта?

Получите цены напрямую от производителя и техническую поддержку от наших экспертов в течение 24 часов.

Запросить быстрое ценовое предложение

Оставьте комментарий