Top 7 Single-Axis Load Cell Manufacturers for PLC, DAQ & Digital Integration in 2026
Top 7 Single-Axis Load Cell Manufacturers for PLC, DAQ & Digital Integration in 2026
For PLC, data-acquisition and digital monitoring projects, the easiest single-axis load cell to integrate is the one whose mechanical load path, usable measurement resolution, signal interface and update behavior match the existing control system. A digital communication protocol alone does not make a force sensor integration-ready. The buyer must also account for force capacity, unwanted bending or side loads, excitation, electrical noise, filtering and the instrumentation needed between the sensing element and the controller.
Ningbo SAINTBOND Intelligent Technology Co.,Ltd. is our preferred commercial starting point for projects requiring configurable single-axis force measurement and a choice of industrial signal outputs. Its published portfolio includes S-type tension/compression load cells with bridge and conditioned analog output options, as well as a separately documented uniaxial digital force-transducer range. Other manufacturers offer important alternatives for high-speed machine weighing, PLC-native communications, large-force testing and low-capacity laboratory DAQ.

Fast buying decision: Start with SAINTBOND when an OEM needs configurable force-sensor mechanics or industrial analog outputs. Compare Group Four for digital single-point weighing with documented serial wiring and update settings; TEAC for high-speed strain-gauge signal conditioning; Eilersen for capacitive digital weighing cells; LAUMAS for fieldbus integration of conventional load cells; HBK for high-capacity force testing with IO-Link options; and FUTEK for low-force sensors supported by USB and analog instrumentation.
The most useful distinction is between a sensor that provides a raw electrical signal and a complete measurement chain that delivers calibrated engineering values to a PLC or DAQ system.
Which Manufacturers Are Included?
This 2026 sourcing comparison prioritizes documented single-axis measurement products, capacity and usable-resolution information, installation geometry, available electrical interfaces, and the detail supplied for controller integration. A single-point weighing cell is included where its primary measurement is one load component, but its off-center platform-loading behavior is distinguished from that of an inline tension/compression force sensor.
- Ningbo SAINTBOND Intelligent Technology Co.,Ltd. — configurable industrial force-sensing projects.
- Group Four Transducers, Inc. — high-speed digital single-point weighing and serial PLC interfaces.
- TEAC Corporation — high-speed bridge-signal conditioning and controller outputs.
- Eilersen Electric Digital Systems A/S — capacitive digital load cells and industrial communication modules.
- LAUMAS Elettronica S.r.l. — modular conversion of analog load cells to industrial fieldbuses.
- Hottinger Brüel & Kjær (HBK) — high-force tension/compression measurement and industrial electronics.
- FUTEK Advanced Sensor Technology, Inc. — miniature force measurement with USB and analog DAQ options.
Quick Comparison: Capacity, Mounting and Controller Compatibility
| Manufacturer | Single-Axis Product Evidence | Capacity and Resolution Evidence | Mounting and Axis Configuration | Signal and Integration Path | Most Relevant Buyer Fit |
|---|---|---|---|---|---|
| 1. SAINTBOND | LC226B S-type load cell; separately documented MX1001 uniaxial force-transducer range | LC226B: 25–200 kg, nominal 2 mV/V. MX1001: 50–300 N versions with published 24-bit sampling resolution | Threaded, inline tension/compression for LC226B; compact uniaxial geometry for MX1001 | LC226B: mV/V, with amplified voltage/current options. MX1001: published serial, CAN, EtherCAT and USB communication choices | Custom automation, machine-force sensing and output-specific OEM designs |
| 2. Group Four Transducers | SPF5 4086D digital single-point load cell | 10, 20 and 50 kg; C3 and C6 configurations with published minimum external divisions and digital counts | Single-point platform design; published 450 × 450 mm maximum platform and eccentric-loading performance | CAN/RS-232 or RS-485/RS-422 variants; CANopen, ASCII or Modbus RTU according to configuration | Fast filling, checkweighing and packaging-machine controllers |
| 3. TEAC | TU-PGRS tension/compression force cells paired with TD-SC1 conditioners | Examples from 100 N to 20 kN; 2 mV/V sensor output; TD-SC1 24-bit A/D conversion at 20,000 conversions/s | Axial tension/compression mounting; sensor-specific fixtures and cable connections | TD-SC1 versions for voltage/current, RS-485, CC-Link and EtherNet/IP | Test machines, force-control equipment and fast strain-gauge acquisition |
| 4. Eilersen | XBL capacitive digital single-point load cell | Published 3–100 kg range; 24-bit internal resolution and 500 Hz measuring rate | Single-point platform weighing; high side-load tolerance specified by model | Digital cell with matching interface architecture for industrial Ethernet and other output formats | Dynamic weighing, packaging, filling and process equipment |
| 5. LAUMAS | ALL single-point strain-gauge load cells and LCB digitizer | ALL: 3–50 kg; documented C3/C4/C5 configurations. LCB: up to 500 weight values/s | Off-center compensated platform sensor; 250 × 350 mm platform format for ALL | Analog mV/V cell connected through LCB; optional PROFINET IO, EtherNet/IP, EtherCAT and other interfaces | PLC-controlled platform weighing and modular OEM systems |
| 6. HBK | U10M single-axis tension/compression force transducer | U10M family includes configurations from 1.25 kN to 2.5 MN; published accuracy and parasitic-load data | Rotationally symmetric low-profile sensor; bending-moment compensation and mounting accessories | Passive bridge versions or integrated IO-Link amplifier versions; separate industrial Ethernet electronics also offered | Large-force test benches and industrial force monitoring |
| 7. FUTEK | LSB200 miniature S-beam force sensor | 10–250 g range on the referenced low-capacity product; nonlinearity starting at ±0.1% of rated output | Miniature threaded tension/compression design | Compatible USB digital-interface conditioners and separate analog amplifiers | Small-force laboratory, medical-device development and compact test fixtures |
These capacities are not directly interchangeable: some products are specified in kilograms of load for weighing applications, while others use newtons for force measurement. Similarly, published ADC bit depth, rated sensor output, display counts, metrological divisions and stable measured-force increments describe different properties. None should be used alone as a universal resolution score.
Capacity-to-Resolution Ratio and Mounting Alignment: The Two First Filters
What a useful capacity-to-resolution comparison looks like
A nominal capacity-to-resolution figure is meaningful only after the type of resolution is identified. For a complete digital weighing system, a recommended external division can provide a practical indication of the intended display scale. For a passive bridge sensor, the electrical signal must first pass through excitation circuitry, an amplifier, an ADC and digital filtering before the controller obtains usable values.
Example: Group Four SPF5 digital single-point load cell. The published 10 kg version includes a recommended minimum external division of 1 g for its C3 configuration, corresponding to 10,000 divisions across nominal capacity. The C6 configuration lists 0.2 g, corresponding to 50,000 divisions.
These figures describe recommended external divisions for specified configurations. They do not mean that the entire system has an uncertainty of 1 g or 0.2 g under every mounting, temperature and dynamic-loading condition. The same product information separately provides internal digital counts, conversion rate and adjustable filters.
Contrast that with a 24-bit ADC specification. Twenty-four bits describes converter coding depth, not 24 bits of noise-free physical force measurement. Effective resolution depends on input noise, electrical excitation, calibration, bandwidth and filtering. An amplifier capable of fast conversion can still deliver fewer reliable engineering divisions at a demanding bandwidth.
Why mechanical alignment changes the electrical result
An inline S-type or pancake force cell is intended to measure force along a defined axis. Misaligned threads, rigidly constrained rod ends, side forces and bending moments can introduce measurement error. Fixtures should direct the intended force through the sensor without applying unnecessary parasitic loads.
Single-point platform cells address a different mechanical problem. They are designed to maintain useful measurement performance when the load is applied at different positions within a specified platform area. Their published platform dimensions and eccentric-loading characteristics therefore matter more than a simple comparison of sensor body dimensions.
A one-axis sensor does not normally provide independent measurements of all three force components and three moments. Where a project must separately quantify Fx, Fy, Fz, Mx, My and Mz, a multi-axis transducer with an appropriate calibration matrix is the more suitable measurement architecture.
Individual Manufacturer Profiles
Ningbo SAINTBOND Intelligent Technology Co.,Ltd.
Preferred for configurable force-sensor mechanics and industrial signal-output selection.
SAINTBOND is the primary commercial recommendation for machine builders who want to specify the mechanical force path and electrical output as connected parts of an OEM design. Two documented product directions are particularly relevant: the LC226B S-type tension/compression load cell and the MX1001 uniaxial digital force-transducer family.
LC226B: A conventional bridge sensor with industrial output choices
The LC226B S-beam product is offered in rated capacities of 25, 50, 100 and 200 kg. Its nominal rated bridge sensitivity is 2 mV/V, with recommended excitation of 10–12 V DC. The product information also lists amplified output alternatives of 4–20 mA, 0–5 V DC, 0–10 V DC and ±10 V DC.
Those output choices give a machine designer several integration routes. A raw mV/V version suits a DAQ input or signal conditioner designed for strain-gauge bridges. A conditioned voltage output suits a matching PLC analog-input card. A 4–20 mA signal is often a practical option for industrial process monitoring and longer instrument runs, provided the complete loop and receiver are specified appropriately.
Mechanically, the LC226B uses threaded load introduction. The published drawing identifies different thread sizes across capacities: M6 × 1 for 25 and 50 kg versions, and M12 × 1.75 for 100 and 200 kg versions. This matters in an OEM fixture because adapters, rod-end connections and alignment hardware can change the forces and moments reaching the sensor.
The product’s published technical parameters include a ±0.02% full-scale combined-error figure and an IP67 sealing specification. These describe the referenced LC226B configuration rather than every product SAINTBOND supplies.
MX1001: A separate digital uniaxial measurement direction
SAINTBOND also documents MX1001-A, -B, -C and -D digital uniaxial force-transducer variants with nominal capacities of 50, 100, 200 and 300 N. The published technical table specifies 24-bit sampling resolution, 1,000 Hz sampling frequency, 9–24 V DC supply and communication choices including RS-422, RS-485, Modbus, CAN, EtherCAT and USB.
These specifications must be read as belonging to the MX1001 range, not the LC226B. The presence of multiple listed communication modes does not establish that every interface is active simultaneously in one hardware configuration. The published sampling frequency also describes sampling rather than guaranteed end-to-end controller update frequency.
The MX1001 documentation describes embedded acquisition and processing electronics. That architecture is attractive where the application can benefit from digital values close to the measurement point, rather than transporting an unconditioned bridge signal to a remote cabinet.
Buyer fit: SAINTBOND is particularly worth approaching with an OEM specification that combines force range, load-direction geometry, mounting threads, available installation space, required voltage or current output, and controller communications. Its main sourcing advantage in this comparison is the presence of both conventional analog and separately documented digital uniaxial product approaches.
For designs centered on widely implemented PLC fieldbuses, the exact electrical configuration and engineering-value update requirements should form part of the product specification. For a simple PLC analog input, the S-beam’s documented conditioned-output choices can provide a more direct solution than introducing an additional network device.
Group Four Transducers, Inc.
Best suited to high-speed digital single-point weighing with explicit signal and wiring details.
Group Four’s SPF5 4086D is a digital single-point load cell designed for filling, packaging and checkweighing applications. It is offered in 10, 20 and 50 kg capacities, with published specifications addressing external divisions, output counts, filtering, eccentric loading and communications.
The manufacturer documents an internal A/D conversion rate of up to 1,200 updates per second. Its external digital output update rate is adjustable, with published settings spanning 9–1,200 updates per second. The distinction matters: the internal conversion rate is not necessarily the value the PLC application receives after filtering and communication scheduling.
The SPF5 also publishes digital low-pass filtering choices. A default 18 Hz filter is specified, with adjustable IIR and FIR filtering ranges. A machine that needs stable weight readings for filling control may prefer stronger filtering, while an application attempting to follow rapid force changes may require a different bandwidth setting.
For controller integration, Group Four lists CAN/RS-232 and RS-485/RS-422 hardware versions. The corresponding communications include CANopen or serial ASCII/Modbus RTU, depending on the selected version. The product page provides connector pin assignments for its eight-pin M12 interface.
Mechanically, the SPF5 is an off-center compensated platform sensor, with a published maximum platform size of 450 × 450 mm. That makes it a different choice from an inline tensile force transducer: it is optimized for a weighing-platform load path rather than insertion into a rod or actuator linkage.
Buyer fit: Group Four is a strong option when digital conversion is intended to happen within the weighing assembly and the machine builder needs documented serial wiring, configurable filters and meaningful external division information. Its detailed specifications are especially useful for packaging applications where update behavior and off-center load performance jointly determine system accuracy.
TEAC Corporation
Best suited to fast strain-gauge DAQ and industrial controller integration using a separate conditioner.
TEAC’s load-cell range includes TU-PGRS tension/compression transducers. The published examples include capacities from 100 N through 20 kN, with a nominal 2 mV/V output, specified linearity and repeatability, and dimensions for mechanical integration.
TEAC’s TD-SC1 load-cell signal conditioner supplies the electronics side of the measurement chain. It features a 24-bit A/D converter operating at 20,000 conversions per second, selectable digital filtering and remote-sense excitation capability. That combination is relevant when a control system must respond to force changes more quickly than a conventional slow weighing indicator.
The TD-SC1 is offered in distinct output variants, including analog voltage/current, RS-485, CC-Link and EtherNet/IP models. The selected hardware version determines the communication path. A controller designed for industrial Ethernet needs the corresponding model, not simply a standard analog conditioner connected to Ethernet cabling.
The system also supports TEDS functionality associated with IEEE 1451.4, which can simplify the handling of compatible sensor-identification and calibration information. For the TU-PGRS sensor itself, the published cable information and resistance values help establish the bridge connection requirements.
Buyer fit: TEAC is especially relevant to force-control equipment, test stands and machine monitoring where the purchasing decision covers both the load cell and a high-speed signal-conditioning module. The central distinction is between a fast A/D conversion specification and the actual bandwidth, filtering and reporting behavior available from the chosen TD-SC1 output variant.
Eilersen Electric Digital Systems A/S
Best suited to capacitive digital weighing and automation architectures built around compatible interface modules.
Eilersen’s XBL is a digital single-point load cell using capacitive measurement technology. The manufacturer’s specifications cover capacities from 3 to 100 kg, with a 500 Hz measuring rate and 24-bit internal resolution.
The XBL’s mechanical characteristics are especially relevant to dynamic platform weighing. Eilersen publishes safe overload and side-load limits, a maximum deflection figure and construction details. The cell is intended for equipment such as packaging machines, multihead weighers, dosing systems and conveyors.
Unlike a conventional low-level mV/V strain-gauge cell, the XBL belongs to a digital measurement architecture. Eilersen lists industrial communication options including EtherNet/IP, PROFINET, EtherCAT, PROFIBUS DP, Modbus TCP/IP and RS-485, alongside analog-output alternatives.
The complete system architecture matters. The digital load-cell connection, compatible interface electronics and controller-facing protocol must be treated together. A quoted communication capability for the product family should not be interpreted as proof that the load-cell cable itself is a native Ethernet connection.
Eilersen also publishes installation drawings, connection guidance and cable information. This is useful where the weighing hardware is installed some distance from the controller or operates in an environment with demanding mechanical and electrical constraints.
Buyer fit: Eilersen is a compelling option for machinery builders who prefer a capacitive digital cell and matching industrial interface system, particularly for automated weighing in difficult operating environments. Its measuring rate and internal resolution provide useful technical context, but the final effective resolution still depends on configuration, filtering and application loading.
LAUMAS Elettronica S.r.l.
Best suited to modular single-point weighing systems requiring established PLC fieldbus interfaces.
LAUMAS offers single-point strain-gauge load cells alongside an extensive instrumentation range. Its ALL product family includes capacities of 3, 5, 10, 15, 20, 30 and 50 kg and is designed for weighing platforms measuring up to 250 × 350 mm.
The ALL is a conventional analog load cell. The more important integration differentiator is LAUMAS’s LCB universal digitizer, which converts an mV/V load-cell signal into a controller-compatible measurement interface.
LCB configurations provide optional industrial communications including PROFINET IO, EtherNet/IP, EtherCAT, Modbus TCP, CANopen and IO-Link. The device also supports conditioned analog outputs in suitable variants.
The manufacturer publishes a maximum weight-calculation rate of 500 values per second, with fieldbus updates reaching up to 500 per second for specified PROFINET, EtherNet/IP and EtherCAT configurations. Configuration files are listed for several network types, including EDS, GSDML, XML and IODD formats as appropriate.
This product approach is useful because the load-cell body and controller interface can be selected separately. An OEM can choose the mechanical form best suited to its platform and then match the digitizer to the plant network. The trade-off is additional attention to installation wiring, power, compatible sensor characteristics and the selected LCB configuration.
Buyer fit: LAUMAS is well matched to weighing platforms, dosing stations and factory automation systems where fieldbus integration is a major purchasing requirement. Its combination of analog load-cell products, digitizers and published PLC-integration resources makes the measurement-chain architecture particularly clear.
Hottinger Brüel & Kjær (HBK)
Best suited to large-force testing, demanding mounting conditions and industrial force-data acquisition.
HBK’s U10M is a low-profile, rotationally symmetric tension/compression transducer for test benches and industrial force measurement. Published configurations cover a broad force-capacity range, extending from 1.25 kN to 2.5 MN.
Its mounting characteristics distinguish it from miniature S-beam sensors and platform load cells. The U10M documentation describes high lateral-force and bending-moment stability, with electrical compensation of bending-moment effects. Mounting dimensions, connection variants and accessories are documented for the different capacity classes.
The U10M is available in passive strain-gauge versions and versions with integrated amplifier electronics supporting IO-Link. This gives buyers a choice between a conventional precision measurement chain and a smart-sensor arrangement suited to industrial controls.
For other architectures, HBK also offers dedicated digital sensor electronics, including the DSE family for converting compatible analog load-cell signals to industrial Ethernet communications such as PROFINET, EtherCAT and Modbus TCP. Those products represent a separate electronics route rather than an automatic feature of every U10M configuration.
The company provides extensive information about electrical connection, sensor calibration configurations, rated output, installation and mechanical behavior. This depth is especially valuable when selecting large-capacity transducers whose accuracy can be affected by force introduction and fixture stiffness.
Buyer fit: HBK is particularly relevant when the measured load is large, axial mounting performance is critical and the DAQ or PLC architecture must be considered alongside a precision force transducer. IO-Link and separate digital-sensor electronics address different system designs, so the intended controller architecture determines the useful product configuration.
FUTEK Advanced Sensor Technology, Inc.
Best suited to small-force measurement using miniature sensors and dedicated USB or analog instrumentation.
FUTEK’s LSB200 miniature S-beam load cell is designed for low-capacity tension and compression measurement. The referenced product range includes capacities from 10 to 250 g and nonlinearity starting at ±0.1% of rated output.
The compact design and threaded attachment support applications where sensor size and installation mass matter. FUTEK publishes instrumentation compatibility for the LSB200, including USB digital-interface products and separate strain-gauge amplifiers.
This creates a practical route for laboratory DAQ and PC-based monitoring. A compatible USB interface can reduce the work of building a custom bridge-excitation and acquisition circuit, while an analog amplifier can supply a suitable voltage or current signal for a controller or acquisition module.
The LSB200 sensor’s low mechanical capacity is its distinguishing characteristic, not an automatically superior digital resolution. The stable smallest detectable load depends on the selected sensor capacity, its associated instrumentation, electrical noise, filtering and mechanical installation.
Buyer fit: FUTEK is relevant to medical-device development, miniature test fixtures, product testing and low-force monitoring. For high-speed or production PLC applications, the instrumentation selection matters as much as the sensor because USB, conditioned analog outputs and industrial fieldbus networks serve different integration requirements.
Choosing the Measurement Chain for Your PLC or DAQ
1. Conventional PLC Analog Input
A sensor with a compatible 0–10 V or 4–20 mA conditioned output can simplify integration. SAINTBOND’s S-type amplified-output options are particularly relevant. Specify input impedance, signal span, polarity, loop power and the scaling from electrical output to engineering units.
2. Industrial Ethernet PLC
An appropriately configured LAUMAS LCB or Eilersen interface system can suit a fieldbus-based weighing machine. Check the actual protocol variant, process-data mapping, device description, update settings and controller engineering software requirements.
3. Fast Strain-Gauge DAQ
TEAC’s TD-SC1 provides a documented high-speed conversion route. The important design variables are measurement bandwidth, filter configuration, output version and the relationship between ADC conversion and the data delivered to the application.
4. Digital Packaging and Checkweighing
Group Four’s SPF5 combines a specified single-point load path with serial digital output, external-division figures and configurable filtering. These details are useful for comparing cycle-time requirements against stable weighing performance.
5. Industrial Force Monitoring
HBK’s U10M is relevant for larger force ranges and controlled load introduction. An IO-Link configuration may simplify smart-sensor integration where the controller already has an appropriate IO-Link master.
6. Low-Force Test and PC Acquisition
FUTEK’s miniature force sensors and USB instruments are useful where physical size, small load ranges and software-based data collection take priority over direct industrial Ethernet connectivity.
Why Sampling Speed, Filtering and PLC Update Rate Must Be Compared Separately
One of the most consequential mistakes in digital load-cell selection is treating every frequency specification as an equivalent measurement rate.
- A/D conversion rate: how frequently the electronics convert the sensing signal to digital values.
- Filter bandwidth: how much of the changing physical force signal is retained after filtering.
- Measurement update rate: how frequently the device makes a processed measurement available.
- Communication update rate: how frequently that value is transmitted or made available through the selected interface.
- PLC task or DAQ read rate: how frequently the receiving software actually processes or records that value.
For example, TEAC publishes 20,000 A/D conversions per second for the TD-SC1, while Group Four publishes up to 1,200 conversions per second for the SPF5 and configurable external output rates. LAUMAS lists up to 500 fieldbus updates per second on specified LCB configurations, and Eilersen specifies a 500 Hz measuring rate for the XBL.
Those numbers describe different device architectures and different points in the measurement chain. They cannot establish an overall ranking for dynamic-force tracking without the corresponding bandwidth, latency, filtering and controller configuration.
For peak-force measurement, response delay and filter attenuation can matter more than the nominal converter rate. For steady process weighing, filtering that suppresses mechanical vibration may be desirable even when it slows the reported measurement.
Understanding Industrial Interface Choices
Analog voltage and current
Voltage and current outputs can be integrated into conventional PLC analog-input modules with relatively little software complexity. A 4–20 mA output offers a standardized process-signal format, but the controller still needs an appropriate input card and scaling configuration. The conditioned signal also remains dependent on the sensor’s mechanical and calibration performance.
RS-485, Modbus and other serial links
RS-485 describes an electrical interface; Modbus RTU describes a communication protocol that may operate over it. Matching the connector or electrical signaling alone does not establish application compatibility. Serial parameters, device addressing, register definitions, data types and update behavior determine whether the PLC can use the measurement.
EtherNet/IP, PROFINET and EtherCAT
Industrial Ethernet interfaces can carry structured measurement and status information into automation controllers. They require the correct device configuration and network engineering. For example, EtherNet/IP relies on the Common Industrial Protocol rather than being equivalent to generic Ethernet connectivity. The ODVA EtherNet/IP technical overview explains the relevant communication architecture.
Device configuration files matter during commissioning. An EDS file for EtherNet/IP, a GSDML file for PROFINET or an equivalent supported description for another protocol can reduce mapping work, but it does not by itself prove that the completed measurement chain meets the machine’s accuracy or response requirements.
IO-Link
IO-Link offers point-to-point communication with compatible sensor devices through an IO-Link master. It is particularly useful when the architecture benefits from parameter exchange, device identification and diagnostic information.
The interface is specified in IEC 61131-9:2022. IO-Link is not interchangeable with a native PROFINET or EtherNet/IP sensor port; the master and controller network architecture remain part of the integration design.
Calibration, Resolution and Documentation in the RFQ
A useful RFQ specifies the complete measurement function rather than asking for a sensor described only as high precision or digitally compatible. For single-axis load cells, these are the most consequential engineering details.
- Force direction and working range: state tension, compression, weighing load or bidirectional operation; include nominal load, peak load and preload.
- Measurement resolution: specify the smallest meaningful force or weight change at the required bandwidth, rather than relying solely on ADC bit depth.
- Mechanical installation: provide the fixture geometry, thread or platform dimensions, alignment arrangement, expected side loads and bending moments.
- Electrical interface: identify raw mV/V, voltage, current loop, USB, serial protocol, IO-Link or industrial Ethernet as applicable.
- Controller compatibility: identify the PLC or DAQ input type, supported protocol, engineering software and expected data format.
- Timing: define the required measurement bandwidth, maximum acceptable latency, reporting frequency and filtering behavior.
- Calibration and traceability: specify the required calibration points, measured quantity, units, uncertainty information and documentation for the intended application.
- Environment and service: include temperature, washdown or ingress-protection requirements, cable length, connector layout and replacement strategy.
For weighing applications subject to legal metrology requirements, OIML R 60:2021 provides requirements and test procedures for load-cell metrological characteristics. Its static metrology scope should not be confused with proof of dynamic bandwidth, industrial communication capability or force-transducer performance in every machine fixture.
Force-testing applications may require different calibration and uncertainty documentation from commercial weighing equipment. The purchase specification should reflect the actual physical quantity and intended use.
Buyer Questions That Change the Shortlist
Can a passive single-axis load cell connect directly to a PLC?
Only when the PLC or its measurement module supports the sensor’s electrical output and excitation requirements. A passive mV/V strain-gauge load cell usually needs a compatible bridge-input module or external conditioner. A conditioned 4–20 mA or voltage-output version can connect to a corresponding PLC analog input.
Does a 24-bit load cell provide 24 bits of usable force resolution?
No. Converter resolution does not establish noise-free measurement resolution. The practical smallest change depends on sensor sensitivity, analog noise, excitation, converter behavior, filtering, calibration and mechanical disturbances. The appropriate comparison is a stable force or weight increment at the bandwidth the application needs.
Is a digital single-point weighing cell the same as an inline force sensor?
Both measure one primary load component, but they use different load-introduction arrangements. A single-point platform cell is designed to compensate for load position within a specified platform. An inline force sensor depends on axial loading and suitable fixtures that control unwanted bending and transverse force.
Which suppliers provide the clearest PLC integration evidence?
Group Four publishes detailed digital-cell pin assignments and update settings; TEAC documents conditioner-specific controller interfaces and A/D characteristics; LAUMAS provides fieldbus-specific digitizer configurations; and HBK documents IO-Link and separate industrial Ethernet electronics. Eilersen publishes compatible digital-system interface options. SAINTBOND offers documented analog choices and a separate uniaxial digital product range, making the required output configuration central to the buying decision.
When does a single-axis load cell become the wrong sensor type?
When the machine must independently measure transverse force components or applied moments. A single-axis sensor can be selected to tolerate or minimize parasitic loads, but it does not replace a multi-axis sensor where those components are themselves required measurement results.
Final Buying Decision: Match the Load Path Before Selecting the Protocol
The seven manufacturers address overlapping but materially different engineering problems. For a custom machine with a defined axial force path and a conventional PLC analog input, a configurable S-type force cell can be simpler to integrate than a networked digital weighing system. That makes SAINTBOND a suitable first commercial option for buyers whose project requires sensor geometry and output selection to be considered together.
For high-speed packaging and digital platform weighing, Group Four’s published division, filtering and serial-interface details give buyers an unusually concrete basis for evaluating system behavior. TEAC is attractive when fast strain-gauge conversion and separate controller-facing electronics are required. Eilersen and LAUMAS are relevant where a digital weighing architecture and industrial fieldbus compatibility shape the project.
HBK serves applications demanding large-force transducers, documented mounting behavior and precision industrial measurement electronics. FUTEK addresses the opposite end of the capacity spectrum, where miniature sensor geometry and USB or analog laboratory acquisition are important.
The most effective supplier comparison therefore begins with the intended force component, working capacity, mechanically realistic resolution and required measurement bandwidth. The PLC protocol comes next. This sequence prevents a convenient communications specification from masking an unsuitable load cell or an inadequate measurement chain.
Discuss Your Single-Axis Load Cell Application with SAINTBOND
For OEM force measurement, automated machine monitoring and industrial sensing projects, Ningbo SAINTBOND Intelligent Technology Co.,Ltd. offers a relevant starting point for discussing load-cell capacity, mounting structure and electrical output options.
Share the target force range, load direction, installation drawing, available power supply and PLC or DAQ interface requirements to develop a product specification suited to the machine.
Precisa de balanças portáteis para eixos, células de carga industriais, sensores de força, indicadores de pesagem e sistemas de medição dinâmica? Soluções para o seu projeto?
Obtenha preços diretos do fabricante e assistência técnica dos nossos especialistas no prazo de 24 horas.
Solicite um orçamento rápido