Top 7 Multi-Axis Load Cell Suppliers for Test-Equipment Builders

Top 7 Multi-Axis Load Cell Suppliers for Test-Equipment Builders For test-equipment builders, selecting a multi-axis load cell requires more than matching a nominal force...

Top 7 Multi-Axis Load Cell Suppliers for Test-Equipment Builders

Top 7 Multi-Axis Load Cell Suppliers for Test-Equipment Builders

For test-equipment builders, selecting a multi-axis load cell requires more than matching a nominal force capacity. The right supplier must provide the necessary combination of force and moment measurement ranges, manageable cross-talk, a documented decoupling method, reliable calibration information, and an integration path compatible with the equipment’s data acquisition system.

Ningbo SAINTBOND Intelligent Technology Co.,Ltd. is the preferred first option in this comparison for compact, lower-force six-axis measurement systems. Its LCX6002 family combines embedded data acquisition with decoupled force and torque output. For larger structural test rigs, GTM, SRI, HBK and TE Connectivity offer broader force and moment ranges, while ME-Systeme provides an interesting matrix-compensated alternative. ATI Industrial Automation is particularly relevant when compact packaging and integrated electronics are priorities.

Ningbo SAINTBOND Intelligent Technology Co.,Ltd.

This comparison focuses on six-component measurement: three orthogonal forces (Fx, Fy and Fz) and three moments (Mx, My and Mz). It distinguishes actual six-axis products from broader multi-axis product categories and gives priority to published model ranges, cross-talk and decoupling characteristics, test applications, calibration documentation, and practical integration requirements.

Top 7 suppliers at a glance

  1. Ningbo SAINTBOND Intelligent Technology Co.,Ltd. — compact six-axis sensors with embedded acquisition and decoupled output.
  2. GTM GmbH — high-capacity multi-component transducers and engineered test platforms.
  3. Sunrise Instruments (SRI) — multiple six-axis product families with documented cross-talk and decoupling specifications.
  4. HBK (Hottinger Brüel & Kjær) — MCS10 multi-component sensors with broad force and moment ranges.
  5. ME-Meßsysteme GmbH (ME-Systeme) — K6D sensors with calibration matrices and operating-point compensation.
  6. TE Connectivity (MEAS) — FN7325 six-component load cells for industrial and structural testing.
  7. ATI Industrial Automation — integrated six-axis force/torque systems for compact test and automation equipment.

How to evaluate multi-axis load cell suppliers for test equipment

The first selection decision is the measurement configuration. A three-axis force sensor measures Fx, Fy and Fz, while a six-axis force/torque sensor also measures Mx, My and Mz. These are different capabilities, even when manufacturers group them under the same multi-axis product category.

For test-equipment builders, five considerations determine whether a sensor is suitable for a particular machine.

1. Axis configuration and rated force and moment ranges

Compare every measurement channel independently. A sensor might have a relatively high axial force capacity but much lower lateral force or bending moment ratings. Those differences become important when measuring friction, eccentric loading, component deformation or complex structural interactions.

For example, a six-axis sensor rated at 500 N in Fx and Fy, 900 N in Fz and 20 Nm in the moment channels is fundamentally different from a large structural transducer rated in hundreds of kilonewtons.

The rated capacity must also be considered against the actual combined load cases. A fixture can experience axial force, lateral force and bending moment simultaneously. Individual maximum ratings should not automatically be treated as simultaneous operating capacities.

2. Cross-talk and decoupling method

Cross-talk occurs when a load applied along one measurement axis produces an unwanted response in another axis. It can affect measurement accuracy when a test fixture experiences several simultaneous force and moment components.

Two common approaches are matrix decoupling and structural decoupling.

  • Matrix decoupling: Six raw measurement signals are processed through a calibration matrix to calculate the six force and moment components. The matrix accounts for interactions between channels.
  • Structural decoupling: The mechanical construction separates the measurement components so that the individual outputs are more independent. This can reduce reliance on mathematical compensation.
  • Mechanical decoupling: Some specialized platforms incorporate mechanical separation into their design, reducing unwanted interactions between applied loads.

These approaches should not be treated as interchangeable. A matrix-decoupled sensor needs the correct calibration coefficients and signal-processing implementation. A structurally decoupled sensor still needs an evaluation of its residual cross-talk under actual operating loads.

3. Calibration and documentation

A useful calibration package should connect the individual sensor to its actual measurement characteristics. For a six-axis sensor, the calibration information should identify the force and moment ranges, sensitivity coefficients, coordinate origin, correction factors and relevant measurement errors.

For matrix-decoupled sensors, the calibration matrix is especially important. A generic matrix or an incorrect calibration version can produce misleading force and moment results even when the sensor itself is functioning correctly.

4. Data acquisition and integration

Test-equipment builders should distinguish between a sensor that supplies raw strain-gauge signals and a system that already includes signal conditioning or embedded acquisition.

Raw mV/V outputs typically require suitable bridge excitation, amplification and data acquisition. Digital or conditioned outputs can simplify integration, particularly when a machine uses EtherCAT, CAN, Ethernet, USB or serial communication.

Sampling frequency, synchronization, resolution and software support matter just as much as the communication connector. They determine how conveniently the measurement system can be incorporated into the machine controller and test software.

5. Mechanical and lifecycle considerations

Mounting geometry, flange dimensions, cable routing, stiffness, environmental protection and overload limits influence the suitability of a sensor for a particular test fixture.

Calibration services, replacement availability, software support and documentation continuity also affect the long-term practicality of the measurement system.

Quick comparison of the seven suppliers

Rank and supplier Verified six-axis product Force and moment ranges Cross-talk and decoupling Test-equipment integration and buyer fit
1. Ningbo SAINTBOND Intelligent Technology Co.,Ltd. LCX6002 / MX6002 series Fx/Fy: 30–500 N; Fz: 30–700 N; moments: 1.5–18 Nm. Embedded processing and directly decoupled force/torque output. 24-bit acquisition, 1,000 Hz sampling, RS422, RS485, EtherCAT, CAN and USB options. Suitable for compact lower-force test fixtures.
2. GTM GmbH LVS and MKA multi-axis transducers LVS: 10–250 kN axial and 100–5,000 Nm transverse. MKA: up to 4,000 kN axial and 200 kNm transverse. LVS uses a custom 6×6 sensitivity matrix with minimal signal cross-talk. MPF platforms offer integrated mechanical decoupling. Static and dynamic measurement, component testing, structural testing and high-capacity engineered test platforms.
3. Sunrise Instruments (SRI) M37XX/M47XX and M39XX M37XX: 50–6,400 N and 0.5–320 Nm. M39XX: up to 291,600 N, with Mx/My up to 13,500 Nm and Mz up to 10,800 Nm. M37XX: matrix-decoupled, less than 2% cross-talk. M39XX: structurally decoupled, less than 5% cross-talk. Calibration reports, analog and digital options, amplifiers and acquisition systems. Direct relevance to general testing and automotive durability applications.
4. HBK MCS10, six-component variants Fx/Fy: 0.5–40 kN; Fz: 2–200 kN; Mx/My: 0.02–3.5 kNm; Mz: 0.02–3 kNm. HBM’s multi-component measurement workflow documents calibration-matrix compensation for cross-influence between channels. Accuracy class varies by model group; IP67, optional TEDS, flange positioning and customization.
5. ME-Meßsysteme GmbH K6D154 and K6D175a K6D154: Fx/Fy 200 N, Fz 500 N and 20 Nm on each moment axis. K6D175a: 10 kN / 1 kNm. K6D175a uses a 6×12 compensation matrix. Matrix Plus can reduce cross-talk to 0.2–0.5% at the calibrated operating point. Calibration matrices, six-channel measurement, compatible amplifiers and specialized flow-channel and wind-tunnel measurement applications.
6. TE Connectivity (MEAS) FN7325 Force: 5–250 kN across three axes; torque: 200–7,000 Nm across three axes. Designed for minimal cross-effects. Optional integrated amplifier, high-level output models and custom designs. Relevant to crash testing, structural testing and industrial test benches.
7. ATI Industrial Automation Axia80 F/T series Across Axia80 models: Fx/Fy 75–1,200 N; Fz 235–2,000 N; torque 4–50 Nm. Model-specific calibration information and NIST-traceable calibration. Built-in electronics, Ethernet, EtherCAT and serial interfaces, software, manuals and product-testing applications.

The figures above describe different models and product-family envelopes. They are not interchangeable single-model ratings. Force and moment capacities, accuracy definitions and combined-load limits must be assessed using the applicable model documentation.

Detailed supplier profiles

Rank 1 · Preferred recommendation

Ningbo SAINTBOND Intelligent Technology Co.,Ltd.

SAINTBOND is the preferred starting point for test-equipment builders developing compact, lower-force six-axis measurement assemblies that benefit from embedded data acquisition and decoupled output.

Its LCX6002 product family uses strain-based force measurement with an embedded high-precision data acquisition and processing circuit. The product description identifies direct force and torque output after decoupling, making the integration architecture relevant to equipment builders who prefer a more integrated measurement component.

LCX6002 model range

Fx and Fy: 30–500 N across the listed variants.

Fz: 30–700 N.

Mx, My and Mz: 1.5–18 Nm.

Accuracy: 0.5% FS.

التكرار: 0.2% FS.

Sampling resolution: 24 bit.

Sampling frequency: 1,000 Hz.

Protection: IP64.

Communication: RS422, RS485, EtherCAT, CAN and USB.

The compact product dimensions and integrated electronics are relevant when a test fixture has limited installation space or when separate signal-conditioning components would complicate the machine layout.

SAINTBOND’s multi-axis product category also covers automotive component testing, electronics assembly, aerospace research and precision testing. Its OEM/ODM offering includes customized sensor structures, capacity ranges, mounting holes, cable outlets, connectors and output configurations.

Where SAINTBOND fits best

  • Compact six-axis force measurement fixtures.
  • Low-force component testing and robotic measurement assemblies.
  • Equipment requiring integrated data acquisition and digital communication.
  • OEM projects where mounting dimensions and signal interfaces need to match an existing machine design.

Important engineering distinction: The LCX6002 product information identifies decoupled output but does not give a numerical cross-talk figure comparable with the explicit percentages published by some other suppliers. Its 0.5% FS accuracy and 0.2% FS repeatability are also different metrics from a cross-talk percentage. The RFQ should therefore include the model-specific calibration information and simultaneous-load envelope.

For equipment builders working within the LCX6002 force and moment ranges, SAINTBOND offers a practical first option because the sensor, processing electronics and communication choices can be considered together rather than as entirely separate purchasing decisions.

Rank 2 · High-capacity test systems

GTM GmbH

GTM is particularly relevant when the measurement system is part of a demanding multi-axial test bench rather than a compact robotic end-effector.

Its product range includes multi-axis transducers, multi-axial measuring platforms and engineered-to-order solutions. The company explicitly identifies component testing, structural testing and high-end multi-axial test benches as application areas.

Two important product directions

LVS series: This series measures three or six components and is intended for standardized industrial measurement tasks. Its six-component configuration measures Fx, Fy, Fz, Mx, My and Mz.

  • Axial nominal force range: 10–250 kN.
  • Transverse moment range: 100–5,000 Nm in the published series data.
  • Accuracy class: 0.1.
  • Custom 6×6 sensitivity matrix.
  • Low signal cross-talk.

The LVS series is especially interesting for builders who need a defined six-component measurement chain with a documented compensation approach. GTM also offers LT-Digitizer and MCMpro precision amplifiers with integrated compensation-matrix adjustment.

MKA series: The MKA product family is intended for a much broader range of static and dynamic multi-axis measurement tasks.

  • Six measurement components.
  • Axial nominal load up to 4,000 kN.
  • Transverse moment capacity up to 200 kNm.
  • Accuracy class: 0.2.
  • Engineered-to-order configurations.

GTM’s MPF measuring platform adds another option: a custom-engineered six-component platform with integrated mechanical decoupling.

Buyer fit and trade-offs

GTM is a strong candidate for aerospace test benches, structural component testing, industrial fatigue testing and large mechanical assemblies that require substantial force and moment capacity.

Its main advantage is the choice between standardized transducers and custom multi-axis measuring systems. This allows the equipment designer to select the mechanical architecture around the actual test fixture.

The trade-off is that engineered platforms require closer coordination of the mechanical interface, calibration configuration and measuring electronics. Buyers should define the complete load vector and installation geometry before selecting an MKA, LVS or MPF configuration.

Rank 3 · Distinct decoupling architectures

Sunrise Instruments (SRI)

Sunrise Instruments is a particularly useful supplier to evaluate when cross-talk and decoupling are major engineering concerns. Its six-axis product families demonstrate two different approaches to the same measurement problem.

M37XX and M47XX: matrix-decoupled sensors

The M37XX family is designed for robotics, research and general testing. Its published specifications include:

  • Force capacity: 50–6,400 N.
  • Moment capacity: 0.5–320 Nm.
  • Nonlinearity: 0.5% FS.
  • Hysteresis: 0.5% FS.
  • Cross-talk: less than 2%.
  • Overload capacity: 300%.

The M37XX uses a 6×6 decoupling matrix. The matrix is supplied in the calibration documentation, allowing the six raw measurement channels to be converted into the corresponding force and moment components.

SRI offers analog and digital output options, along with its M830X amplifier and M812X data acquisition interface. Integrated amplifier and acquisition arrangements are available for certain sensor sizes.

M39XX: structurally decoupled large-capacity sensors

The M39XX family addresses a different load range. Its published product information identifies capacities reaching 291,600 N, with moment ranges reaching 13,500 Nm on Mx/My and 10,800 Nm on Mz for listed models.

Unlike the M37XX matrix-decoupled design, the M39XX uses structural decoupling. SRI states that no decoupling algorithm is required for this architecture.

The trade-off is visible in the cross-talk specifications: the M39XX family lists cross-talk below 5%, compared with less than 2% for the M37XX.

Why this difference matters

A test-equipment builder should not select between these families using capacity alone. The M37XX offers a lower-cross-talk matrix-decoupled approach for general testing, while the M39XX provides a substantially larger force envelope with structural decoupling.

SRI’s 2026 product catalog also covers six-axis force platforms, automotive crash and durability testing products, amplifiers and data acquisition systems.

SRI is a strong candidate when the project requires a clearly defined measurement architecture and the buyer wants to compare the practical consequences of matrix compensation against structural separation.

Rank 4 · Broad measurement range

HBK (Hottinger Brüel & Kjær)

HBK combines a broad test-and-measurement portfolio with specialized multi-component force transducers. Its MCS10 product family is relevant to test-equipment builders requiring multiple force and moment channels within a compact flange-mounted assembly.

The MCS10 is available in three-component and six-component configurations. For this comparison, the relevant versions are the six-component MCS10-6C models.

MCS10 measurement capabilities

Lateral forces Fx/Fy: 0.5–40 kN across the listed size groups.

Axial force Fz: 2–200 kN.

Bending moments Mx/My: 0.02–3.5 kNm.

Torsional moment Mz: 0.02–3 kNm.

Accuracy class: 0.1 for the BG2 group, 0.15 for BG3 and 0.2 for BG1.

Protection: IP67.

Sensor identification: Optional TEDS.

The flange connection incorporates centering and positioning features. This can be useful when repeatable mechanical alignment is important in a test machine.

Calibration and measurement-chain considerations

HBK’s HBM technical documentation explains matrix compensation for multi-component transducers. A calibration coefficient matrix is used to compensate for interactions between force and moment channels and convert the raw measurement signals into engineering units.

HBK also offers measurement electronics and data acquisition systems, allowing the sensor to be considered within a broader measurement chain.

The MCS10 datasheet distinguishes accuracy classes across its size groups rather than presenting one accuracy figure for every variant. This matters when comparing a smaller precision sensor with a higher-capacity model.

For test-equipment builders, the main advantage is the combination of a defined six-component product family, multiple load ranges, optional sensor identification and a broader measurement-system ecosystem.

HBK is particularly relevant for machinery, automotive and aerospace testing where the sensor must be incorporated into a documented measurement system rather than purchased as an isolated transducer.

Rank 5 · Matrix-calibrated measurement

ME-Meßsysteme GmbH (ME-Systeme)

ME-Systeme offers K6D and F6D six-axis force/torque sensors. Its product range is interesting for equipment builders who need a defined calibration matrix and the ability to optimize cross-talk for a particular operating point.

The K6D sensors use six strain-gauge full bridges. The six electrical measurement signals are processed through a calibration matrix to calculate Fx, Fy, Fz, Mx, My and Mz.

K6D product examples

K6D154 200N/20Nm has the following published ratings:

  • Fx: 200 N.
  • Fy: 200 N.
  • Fz: 500 N.
  • Mx, My and Mz: 20 Nm each.
  • Accuracy class: 0.2.
  • Integrated 27-pole connector.

For larger measurement tasks, the K6D175a is listed with a 10 kN / 1 kNm measuring range. It uses a stainless-steel construction and a 6×12 compensation matrix.

Matrix Plus and cross-talk optimization

One of ME-Systeme’s important differentiators is Matrix Plus. Its technical guidance explains that cross-talk can be reduced by calibrating the sensor around the operating point relevant to the actual application.

The manufacturer describes the potential reduction in cross-talk to 0.2–0.5% at the calibrated operating point. The K6D175a also uses 12 measurement channels to provide a 6×12 compensation matrix for cross-talk correction.

This approach is particularly interesting when one force component is much smaller than another. For example, a test may apply a large axial force while the equipment needs to resolve a comparatively small lateral friction force.

Integration trade-offs

The K6D architecture requires the appropriate calibration matrix and compatible measurement electronics. The GSV-8DS amplifier is one of the documented options.

This creates additional integration work compared with a sensor that directly outputs conditioned digital force and torque values. However, the calibration approach offers useful flexibility when the test equipment has a well-defined operating point.

ME-Systeme is therefore worth considering for flow-channel measurement, wind-tunnel instrumentation and specialized test fixtures where cross-talk compensation is a central design requirement.

Rank 6 · High-force industrial testing

TE Connectivity (MEAS)

TE Connectivity’s MEAS FN7325 is a six-component multi-axis load cell intended for applications involving substantial forces and corresponding moments.

The sensor measures forces along the three spatial axes and torques along the same three axes. Its published product family covers:

  • Force ranges from approximately 5 kN to 250 kN.
  • Corresponding torque ranges from approximately 200 Nm to 7,000 Nm.
  • Minimal cross-effects.
  • Multiple and custom designs.

The FN7325 is specifically associated with crash testing, automotive testing, industrial test benches, mechanical linkages and structural testing.

Signal conditioning and installation

TE offers a high-level output model with an optional integrated amplifier. The product range also includes multiple output configurations and model-dependent protection ratings.

This can be useful when building a test system that requires a larger measurement envelope than compact robotic force/torque sensors typically provide.

The product family includes IP50 and IP65 variants, depending on the selected configuration. The operating temperature range listed for the family is -20°C to 80°C.

Where FN7325 fits

TE Connectivity is a strong option for structural test fixtures, automotive component testing and high-force measurement applications.

Its principal advantage is the combination of six-component measurement, substantial force capacity and explicit industrial testing applications. Its minimal-cross-effects description is useful, although it should not be treated as a substitute for a model-specific numerical cross-talk specification.

For an RFQ, the exact FN7325 part number and its individual force, moment, output and protection ratings should form the basis of the mechanical and electrical design.

Rank 7 · Compact integrated F/T systems

ATI Industrial Automation

ATI Industrial Automation is an established supplier of multi-axis force/torque sensing systems. Its products measure all six force and torque components in a compact transducer and are used in product testing, robotic assembly, polishing and other industrial applications.

The Axia80 series is particularly relevant to test-equipment builders who need a compact measurement component with integrated electronics.

Axia80 model range

Published Axia80 calibration options include:

  • Axia80-M8: Fx/Fy 75–150 N, Fz 235–470 N and 4–8 Nm torque ranges.
  • Axia80-M20: Fx/Fy 200–500 N, Fz 360–900 N and 8–20 Nm torque ranges.
  • Axia80-M50: Fx/Fy 480–1,200 N, Fz 800–2,000 N and 20–50 Nm torque ranges.

The Axia80 has built-in electronics, reducing the footprint associated with separate sensor electronics. Available communication options include Ethernet, EtherCAT, RS422 and RS485.

Calibration and software support

ATI states that its force/torque calibrations are traceable to the National Institute of Standards and Technology (NIST).

The company also provides technical documentation, product drawings, calibration information, software, data-viewing tools and OEM integration manuals.

These resources are valuable when the sensor is being incorporated into a machine that must exchange force and torque data with an existing control or measurement platform.

Best application fit

ATI is particularly suitable for compact product-testing fixtures, robotic force measurement, polishing equipment and automated assembly test systems.

Its Axia80 force and moment capacities are considerably lower than the large structural transducers offered by GTM or TE Connectivity. The advantage is a compact integrated system with a well-developed software and communication ecosystem.

For high-force structural testing, other suppliers in this comparison offer more appropriate nominal ranges.

Engineering selection guide: the differences that change an RFQ

The most important distinction between these suppliers is not simply the maximum force capacity. It is how the sensor handles simultaneous loads and how easily the resulting measurements can be incorporated into a test system.

Matrix-decoupled versus structurally decoupled sensors

Matrix-decoupled sensors require the six raw measurement channels to be transformed using calibration coefficients. The matrix is part of the measurement system, not an optional administrative document.

Examples include SRI’s M37XX family, ME-Systeme’s K6D range and GTM’s LVS transducers.

The advantages are the ability to compensate for channel interactions and, in some designs, optimize the calibration around a particular operating point. The trade-off is that the acquisition system must apply the correct coefficients consistently.

Structurally decoupled sensors use their mechanical geometry to separate the measurement components. SRI’s M39XX is an example. This can simplify the signal-processing arrangement, but the remaining cross-talk still needs to be assessed against the accuracy requirements of the application.

GTM’s MPF platform provides another approach through integrated mechanical decoupling.

Why rated moments deserve as much attention as rated forces

Moment measurement is particularly important when the test specimen is mounted at a distance from the sensor’s coordinate origin.

A lateral force acting through a lever arm creates a moment. Consequently, a fixture that appears to remain within its force capacity can exceed its bending or torsional measurement range.

For example, a test rig measuring axial compression and lateral friction simultaneously should evaluate both force channels and the resulting bending moments.

The load analysis should therefore include:

  • Maximum axial force.
  • Maximum lateral forces.
  • Maximum bending moments.
  • Maximum torsional moment.
  • Combined static and dynamic loading conditions.
  • Load combinations during startup, stopping and transient operation.

HBK’s multi-component load analysis approach is particularly relevant here because its MCS10 documentation addresses combined loading rather than treating every channel as an isolated measurement.

Accuracy, repeatability and cross-talk are different specifications

A frequent mistake in sensor selection is comparing a single accuracy percentage across manufacturers without examining what that percentage represents.

For example:

  • SAINTBOND lists 0.5% FS accuracy and 0.2% FS repeatability for its LCX6002 variants.
  • GTM specifies accuracy classes for its LVS and MKA families.
  • SRI separately identifies nonlinearity, hysteresis and cross-talk.
  • ME-Systeme describes calibration-matrix compensation and operating-point cross-talk reduction.
  • ATI provides calibration traceability and model-specific calibration ranges.

These specifications describe different performance characteristics. A 0.5% FS accuracy figure cannot automatically be compared with a 2% cross-talk figure or an accuracy class of 0.1.

For a serious measurement application, the calibration certificate, uncertainty information, operating range and cross-axis residuals should be evaluated together.

Integrated electronics versus an external acquisition chain

Integrated electronics can reduce the number of components that an equipment builder must install and configure. SAINTBOND’s LCX6002 and ATI’s Axia80 are examples of this approach.

Other sensors, such as the ME-Systeme K6D and Interface-style matrix-compensated architectures, require a more explicit connection between raw measurement signals, calibration matrices and measurement amplifiers.

GTM and HBK offer broader measurement-chain options for industrial test systems, while SRI supplies dedicated amplifiers and acquisition interfaces for its sensor families.

The right choice depends on whether the machine builder wants a relatively integrated sensor or prefers to manage the signal-conditioning and acquisition architecture independently.

RFQ checklist for multi-axis load cell procurement

A well-prepared RFQ should describe the measurement task rather than simply requesting a six-axis sensor quotation.

The following information makes supplier proposals easier to evaluate on the same engineering basis.

  1. Measurement configuration: State whether the system requires two, three or six measurement components. Identify the required force and moment directions.
  2. Individual rated ranges: Provide Fx, Fy, Fz, Mx, My and Mz separately, including tension and compression requirements where relevant.
  3. Combined loading: Describe the maximum simultaneous force and moment combinations, including eccentric loads and relevant lever arms.
  4. Accuracy requirements: Define allowable nonlinearity, hysteresis, repeatability, measurement uncertainty and resolution for each channel.
  5. Cross-talk requirements: Specify acceptable cross-axis influence and whether a calibration matrix, structural decoupling or another compensation approach is required.
  6. Calibration documentation: Request the model-specific calibration certificate, sensitivity coefficients, coordinate origin and applicable correction matrix.
  7. Mechanical installation: Supply mounting drawings, bolt patterns, available space, cable routing and required connector positions.
  8. Electrical integration: Specify mV/V, conditioned analog or digital output requirements, communication protocols and excitation voltage.
  9. Dynamic performance: Define sampling frequency, bandwidth, resonance, transient loads and any fatigue-test requirements.
  10. Environmental conditions: State operating temperature, humidity, dust or water exposure, overload conditions and required protection level.
  11. Lifecycle support: Include calibration arrangements, software documentation, replacement components, repair services and long-term measurement traceability.

Frequently asked questions

1. Is every multi-axis load cell a six-axis load cell?

No. Multi-axis is a general description that can include two-axis, three-axis, four-axis and six-axis configurations.

A six-axis force/torque sensor measures three forces and three moments: Fx, Fy, Fz, Mx, My and Mz. Equipment builders should specify the required measurement components rather than relying on the general term multi-axis.

2. Can a six-axis load cell measure all six maximum rated loads simultaneously?

Not necessarily. Each channel has an individual nominal range, but simultaneous loading can introduce additional mechanical interactions and combined-load limitations.

For example, a large axial force combined with bending moments may produce a different allowable operating condition from an isolated axial load. The sensor’s combined-load envelope must be considered during selection.

3. Which decoupling method is better for test equipment?

Neither method is universally superior.

Matrix decoupling is useful when the measurement system can apply the correct calibration coefficients to all six channels. Structural decoupling can simplify signal processing, but the remaining cross-talk still matters.

For a low-force precision test, a matrix-compensated design may be attractive. For a high-capacity industrial fixture, a structurally decoupled design may simplify the acquisition architecture.

4. Why is the calibration matrix important?

The calibration matrix converts raw sensor outputs into the six force and moment components while compensating for interactions between measurement channels.

Without the correct coefficients, the resulting values can be inaccurate even when the sensor is mechanically sound. Matrix versions and calibration information should remain associated with the individual sensor throughout its service life.

5. Which suppliers are suitable for high-force structural test benches?

GTM, HBK, SRI and TE Connectivity offer relevant higher-capacity options.

GTM’s MKA and LVS series, HBK’s MCS10, SRI’s M39XX and TE’s FN7325 provide substantially different measurement envelopes and integration approaches. The appropriate choice depends on the actual simultaneous force and moment requirements.

6. Which suppliers are worth considering for compact test fixtures?

SAINTBOND, ATI Industrial Automation, SRI’s M37XX family and ME-Systeme’s smaller K6D configurations are relevant options.

These suppliers offer different combinations of compact dimensions, embedded electronics, calibration matrices, communication interfaces and nominal measurement ranges.

7. Should the sensor and data acquisition system be purchased together?

That depends on the equipment architecture. An integrated sensor can simplify installation and reduce the number of separate electronics components. A raw bridge-output sensor with an external amplifier can provide greater flexibility for a customized measurement system.

The important consideration is whether the complete acquisition chain can correctly apply the calibration information, preserve synchronization and deliver the required measurement performance.

Final selection: match the sensor architecture to the test rig

For test-equipment builders, the seven suppliers serve different engineering requirements.

  • SAINTBOND: A preferred first evaluation for compact, lower-force six-axis assemblies requiring embedded acquisition and decoupled output.
  • GTM: Particularly relevant to large multi-axis test benches, structural testing and engineered measuring platforms.
  • SRI: Useful when comparing matrix-decoupled and structurally decoupled sensors across different force and moment ranges.
  • HBK: Relevant to precision multi-component measurement and integration into a broader test-and-measurement system.
  • ME-Systeme: Worth considering when calibration matrices and operating-point cross-talk compensation are important.
  • TE Connectivity: Suitable for high-force industrial, automotive and structural testing.
  • ATI Industrial Automation: A strong option for compact force/torque systems with integrated electronics and software support.

The most effective purchasing decision begins with the six-component load vector, not the supplier name. Define the simultaneous loading conditions, measurement accuracy, cross-talk tolerance, calibration requirements and data acquisition interface before comparing quotations.

A supplier with an impressive maximum force rating may still be unsuitable if its moment capacity or cross-talk performance does not match the test application. Equally, a compact sensor with integrated electronics may offer a simpler and more economical solution when the required measurement envelope is relatively small.

Explore SAINTBOND multi-axis load cell solutions

For test-equipment builders developing compact force and torque measurement systems, Ningbo SAINTBOND Intelligent Technology Co.,Ltd. offers six-axis load cell options with embedded acquisition, decoupled output and multiple communication interfaces.

Its multi-axis product range also supports OEM/ODM discussions involving customized capacity, sensor dimensions, mounting arrangements, cable outlets and output configurations.

Start by defining your six-axis force and moment requirements, installation dimensions and preferred acquisition interface. These details provide a practical basis for matching a standard sensor or evaluating a customized configuration.

Explore the SAINTBOND Multi-Axis Load Cell product range or visit Ningbo SAINTBOND Intelligent Technology Co.,Ltd. to discuss your measurement and OEM requirements.

هل تحتاج إلى موازين محاور محمولة، وخلايا تحميل صناعية، ومستشعرات قوة، وأجهزة عرض الوزن، وأنظمة قياس ديناميكية؟ هل تبحث عن حلول لمشروعك؟

احصل على أسعار مباشرة من المصنع ودعم فني من خبرائنا في غضون 24 ساعة.

اطلب عرض أسعار سريعًا

أضف تعليق