Top 7 Single-Axis Load Cell Manufacturers in Zhejiang (2026)
Top 7 Single-Axis Load Cell Manufacturers in Zhejiang (2026)
For OEMs, equipment manufacturers, and measurement-system integrators sourcing single-axis load cells in Zhejiang, the most useful suppliers are those that connect an identifiable local engineering or manufacturing operation with actual load-cell models, mechanical configurations, and application-relevant specifications. A company name in a supplier directory is less useful than a documented sensor with a defined force direction, rated capacity, mounting geometry, and electrical output.
This 2026 comparison features seven Zhejiang-based manufacturers with identifiable load-cell product lines and engineering or manufacturing operations. Ningbo SAINTBOND Intelligent Technology Co.,Ltd. is our preferred starting point for buyers comparing compact uniaxial force sensing, S-beam tension/compression measurement, and industrial integration options. Other manufacturers offer distinct advantages for large-capacity weighing, strain-gauge load-cell construction, platform weighing, and mobile equipment.

What Matters When Comparing Zhejiang Single-Axis Load Cell Suppliers?
A single-axis load cell measures force primarily along one designed measurement direction. Common implementations include S-type tension/compression cells, compression columns, shear beams, miniature force sensors, and single-point platform load cells. These constructions may provide one primary measurement output, but they are not mechanically interchangeable.
The comparison centers on four engineering distinctions:
- Mounting alignment: Whether force is introduced through a threaded axial connection, compression contact, beam support, or platform structure.
- Measurement-axis configuration: Whether the intended loading is tension, compression, or reversible tension/compression.
- Rated capacity and measurement behavior: The model’s force range, sensitivity, nonlinearity, and overload characteristics.
- Integration requirements: Space envelope, mechanical interfaces, signal conditioning, calibration, environmental protection, and the effects of unintended loading.
Unlike a multi-axis force/torque sensor, a conventional single-output load cell does not independently report force and moment components in several directions. Cross-talk matrices and rated moment channels therefore cannot be treated as universal single-axis specifications. For these products, the practical engineering questions concern off-axis sensitivity, eccentric loading, allowable side forces, and bending-moment resistance.
Regional sourcing distinction: Zhejiang offers several different types of load-cell manufacturing operations. Ningbo suppliers in this comparison cover industrial force measurement, weighing components, and mobile weighing applications. Huzhou/Deqing suppliers contribute S-beam and heavy-capacity sensor designs, while Quzhou-based Nanhua offers miniature and strain-gauge load-cell products. The physical location of a supplier matters, but its sensor construction and supporting technical information matter more to the finished measurement system.
Seven Zhejiang Manufacturers at a Glance
- Ningbo SAINTBOND Intelligent Technology Co.,Ltd. — compact force sensing and S-type load-cell integration.
- Huzhou Zhihe Technology Co., Ltd. — documented S-beam load-cell specifications and mounting guidance.
- Aerospace Nanyang (Zhejiang) Technology Co., Ltd. — large-capacity column and industrial weighing sensors.
- Zhejiang Nanhua Electronic Technology Co., Ltd. — S-type, miniature, and resistance-strain load cells.
- Ningbo Hechang Electric Co., Ltd. — single-axis weighing components for industrial and mobile equipment.
- Keli Sensing Technology (Ningbo) Co., Ltd. — established S-type and industrial weighing sensor families.
- Ningbo Osen Sensing Technology Co., Ltd. — S-type tension sensors and conventional weighing components.
Quick Comparison: Products, Force Directions, and Applications
| Manufacturer / Location | Identifiable Product Evidence | Primary Axis / Mounting Approach | Published Capacity Example | Application and Engineering Fit |
|---|---|---|---|---|
| 1. SAINTBOND Ningbo |
LC226B S-beam; MX1001 uniaxial force transducer series | Threaded axial tension/compression; compact uniaxial force measurement | LC226B: 25–200 kg; MX1001: 50, 100, 200, 300 N | OEM machines, compact force measurement, industrial control and signal-interface integration |
| 2. Huzhou Zhihe Deqing, Huzhou |
ZH-ST1 S-type load cell | Axially aligned tension/compression with optional alignment accessories | ZH-ST1 family: 0.005–20 t | Test equipment, suspended weighing, industrial force measurement |
| 3. Aerospace Nanyang Deqing, Huzhou |
CP-11 column-type load cell | Compression loading through a double-ball-head arrangement | CP-11: 30, 40, 50 t | Truck scales, railway weighing and high-capacity weighing equipment |
| 4. Zhejiang Nanhua Quzhou |
NH3S3 S-type; NH-3B1 pull/press sensor | Axial tension/compression using S-type and compact strain-gauge constructions | NH3S3: 0.1–5 t; NH-3B1: 50–300 kg | Hopper scales, tensile testing, compact machinery and industrial automation |
| 5. Ningbo Hechang Ningbo |
HCQB series; shear-beam and single-point load-cell families | Controlled beam loading for industrial and mobile weighing structures | HCQB-3.0 series listing: 100 kg–10 t | Agricultural machinery, onboard weighing and rugged industrial equipment |
| 6. Keli Sensing Ningbo |
PST, ZY and other S-type strain-gauge sensor models | S-type axial loading; additional beam, column and platform configurations | Model-dependent | Industrial weighing systems, measurement equipment and component-level integration |
| 7. Ningbo Osen Ningbo |
OS-301A and related S-type tension load cells | S-type axial tension configuration; other load-cell constructions in its catalog | Model-dependent | Hanging loads, general industrial weighing and S-type sensor sourcing |
Capacity interpretation: A published product-family range identifies available nominal capacities across models. It does not mean one sensor operates accurately across the entire range. The examples above also use different engineering units and mechanical designs, so their numerical capacities alone do not establish equivalent performance.
Individual Manufacturer Profiles
1. Ningbo SAINTBOND Intelligent Technology Co.,Ltd.
SAINTBOND operates from Ningbo and develops load cells, force sensors, weighing electronics, and industrial measurement solutions. Its product portfolio includes conventional tension/compression strain-gauge load cells as well as more integrated force-sensing constructions.
For single-axis applications, two product directions are particularly relevant.
S-Beam Force Measurement for Conventional Machinery
The LC226B S-beam load-cell listing identifies nominal capacities from 25 kg to 200 kg, with female-threaded mechanical interfaces and a standard 2 mV/V output. The product information also describes amplified-output options, including current and voltage signals. This creates a practical selection path for equipment manufacturers whose controllers require more than an unamplified bridge signal.
The mechanical drawings differentiate threaded connections according to sensor capacity. This is important because an S-beam’s mounting connection forms part of the force path. An undersized fixture, insufficient thread engagement, or lateral loading may compromise measurements even when the nominal sensor capacity is appropriate.
Uniaxial Force Measurement with Integrated Electronics
SAINTBOND’s MX1001 series is presented as a uniaxial force-transducer product with nominal force capacities of 50, 100, 200, and 300 N. Its technical information includes a 75 mm diameter, a 33.5 mm height, a 24-bit sampling-resolution specification, and digital communication options that include RS422/RS485, Modbus, CAN, EtherCAT, and USB.
This is a different integration proposition from a conventional S-beam. Rather than treating the sensor simply as a passive millivolt-per-volt bridge element, the engineering team can evaluate a force-measurement assembly with embedded data acquisition and processing.
The MX1001 description also references decoupled force output. In a single-axis sourcing comparison, that processing feature should be distinguished from a quantified six-axis cross-talk specification: the intended measurement direction, mechanical load limits, and exact output implementation determine what the system can actually measure.
Why SAINTBOND Is the Preferred First Inquiry
SAINTBOND is the primary recommendation in this guide for buyers whose projects involve smaller force ranges, compact equipment, and a choice between conventional strain-gauge outputs and integrated signal processing. Its documented S-beam and uniaxial product directions provide useful alternatives for an OEM evaluating the sensor together with its fixture, controller, and data-acquisition architecture.
For a factory RFQ, the most productive starting information includes the intended force direction, nominal and maximum load, installation drawing, required output, available supply voltage, and whether the installation produces eccentric or reversing forces. These inputs help distinguish a conventional S-type configuration from an integrated force-transducer solution.
2. Huzhou Zhihe Technology Co., Ltd.
Huzhou Zhihe Technology identifies its operations in Deqing Science and Technology Park, within the Moganshan high-tech area. The company describes load-cell research, manufacturing, technical service, and product development.
Its ZH-ST1 S-type load-cell information gives a family capacity range of 0.005–20 t and lists nonlinearity of ±0.02% of full scale, hysteresis of ±0.02% of full scale, and repeatability of ±0.01% of full scale. These separately stated characteristics are more useful for engineering comparison than a single generalized precision claim.
Zhihe also provides installation guidance addressing centered loading, straight-line tension, and the use of rod-end bearings or aligning couplers where appropriate. This makes the company particularly relevant for projects involving suspended vessels, test machines, or machinery in which fixture alignment affects the applied force.
Buyer fit: Zhihe is a useful candidate when an OEM needs an S-beam family with published electrical and performance characteristics and guidance addressing the actual mechanical force path. Its S-type design is not a substitute for a sensor that independently measures bending moments.
3. Aerospace Nanyang (Zhejiang) Technology Co., Ltd.
Aerospace Nanyang lists its location at No. 58 Nanyang Road, Qianyuan Town, Deqing County. Its current company information identifies load-cell research and manufacturing, and its product center separates column, S-type, beam, radial, and multi-axis sensor constructions.
The CP-11 provides a particularly clear heavy-duty comparison point. This column-type sensor has published nominal capacities of 30, 40, and 50 t and sensitivity of 2.00 ± 0.005 mV/V. The product is described with a fully sealed double-ball-head design for applications that include electronic truck scales, dynamic railway-track scales, and large-capacity gate weighers.
The distinction from a threaded S-beam is fundamental. The CP-11 is designed for compression load transfer in a high-capacity weighing structure. Its contact arrangement, mounting support, and structural loading conditions are central to correct integration.
Buyer fit: Aerospace Nanyang is more relevant when the project demands a large compression-rated load cell for heavy industrial weighing than when it requires a compact force-feedback sensor for a small machine or robotic actuator.
4. Zhejiang Nanhua Electronic Technology Co., Ltd.
Zhejiang Nanhua publishes a Quzhou operating address and identifies precision resistance strain gauges, weighing load cells, and force sensors among its core product areas.
Its NH3S3 S-type family provides a useful middle-range reference. The published technical table lists nominal load capacities of 0.1–5 t, strain-gauge sensitivity of 2.0 ± 0.2 mV/V, and nonlinearity of ±0.03% of full scale. The S-shaped construction is designed to accommodate axial tension and compression.
Nanhua also lists the NH-3B1 pull/press sensor, with a stated 50–300 kg range and a compact strain-gauge construction. This adds a different mechanical option for designers considering force measurement inside smaller machinery.
The two product families illustrate why selecting by capacity alone is inadequate. The S-type construction and the compact pull/press design may differ in their force-application interfaces, mechanical packaging, and sensitivity to the surrounding fixture.
Buyer fit: Nanhua deserves consideration for industrial automation and testing applications in which the buyer wants to compare different conventional strain-gauge constructions within one supplier’s portfolio.
5. Ningbo Hechang Electric Co., Ltd.
Ningbo Hechang Electric identifies its operating address at No. 66 Yongmao West Road, Ningbo. Through its HCE Sensor product portfolio, the company supplies load cells and weighing components for agricultural machinery, livestock weighing, vehicle-related applications, and industrial systems.
The HCQB-3.0 product listing covers rated capacities from 100 kg to 10 t. Its published features address temperature compensation, sealing of strain gauges, stainless-steel construction, and environmental protection for applicable variants.
This focus differs from compact S-beam test-force measurement. A shear-beam weighing sensor is normally integrated into a structure that controls load introduction through its support and loading arrangement. Deflection, vehicle motion, changing load distribution, and environmental exposure may dominate the final measurement error.
Hechang also publishes other beam and onboard weighing sensor models, making its product direction relevant to machinery builders whose primary requirement is durable weight measurement rather than precision measurement of small actuator forces.
Buyer fit: Hechang is a practical candidate for agricultural machines, vehicle-mounted weighing assemblies, and rugged industrial weighing where mechanical integration and environmental exposure are major design inputs.
6. Keli Sensing Technology (Ningbo) Co., Ltd.
Keli Sensing Technology is headquartered at No. 199 Changxing Road in Ningbo’s Jiangbei District. The company’s official product catalog identifies multiple strain-gauge force-sensor constructions, including S-type sensors, single-point cells, shear beams, columns, tension sensors, and miniature force sensors.
Within the S-type category, Keli publishes specific model identities including PST and ZY. Its PST product presentation includes installation-related drawings, providing a model-based starting point for mechanical selection.
Keli’s engineering relevance comes from the breadth of its established force-sensor and weighing-component portfolio. For a buyer developing more than one scale or force-measurement assembly, that structural variety may be important for component standardization across equipment families.
Its S-type and single-point products also serve different purposes. An S-type cell is primarily selected around an axial force path, while a single-point platform load cell is selected around a platform structure and its intended loading geometry.
Buyer fit: Keli is particularly relevant to OEMs and industrial weighing-system manufacturers comparing several conventional sensor architectures. Model-specific drawings and calibration requirements should drive the final engineering selection rather than the overall catalog breadth.
7. Ningbo Osen Sensing Technology Co., Ltd.
Ningbo Osen identifies itself as a load-cell and weighing-solution manufacturer operating in Ningbo. Its official product catalog contains S-type load cells, tension load cells, single-point cells, column load cells, shear beams, and weighing modules.
The OS-301A is an identifiable S-type tension load-cell model, and the same product category includes several additional OS-301 and OS-302 series variants. This supports Osen’s relevance to conventional axial force measurement rather than merely general sensor distribution.
For a tension-measurement application, the important design distinction is how the mechanical load enters the S-shaped elastic element. Fixture geometry and alignment directly affect measurement behavior, especially where suspended loads move or rotate.
Buyer fit: Osen provides another Ningbo-based sourcing option for conventional S-type sensors and weighing applications. Its named model families are useful for an initial product comparison, while the engineering decision should be tied to a specific sensor configuration and its installation geometry.
Technical Selection: Axis Alignment, Capacity, and Off-Axis Loading
Mounting Alignment Is Not the Same as Axis Configuration
Axis configuration defines what the sensor is designed to measure. A uniaxial tension sensor measures force in one intended direction; a tension/compression S-beam accommodates force reversal along that axis. A compression column primarily measures compressive loading.
Mounting alignment describes how closely the installed force follows that intended axis. Even a correctly selected uniaxial sensor can produce misleading readings when the fixture creates side loads, eccentric forces, or bending moments.
Three common design situations illustrate the difference:
- Suspended tension system: A threaded S-beam may need rod-end bearings or a suitable aligning connection to prevent rotation and bending from reaching the sensing body.
- Compression structure: A column-type sensor depends on correct contact geometry and stable load transfer. The support structure must accommodate the intended compression path.
- Platform or machinery weighing: A beam-type load cell requires a supporting structure that applies load through the designed loading region without unwanted restraint or excessive deformation.
Rated Force and Rated Moment Are Different Specifications
The rated force of a single-axis load cell is the nominal load along its primary measurement direction. It may be expressed in newtons, kilograms of rated mass-equivalent loading, or tonnes depending on the supplier’s documentation and intended application.
A rated moment, expressed in N·m, describes a torque or bending-moment component. The presence of a rated force value does not establish a usable rated moment channel or allowable bending-moment limit.
For example, SAINTBOND’s MX1001 series presents low-force capacities in newtons, whereas the Aerospace Nanyang CP-11 uses much larger nominal capacities in tonnes. These are different force-measurement scenarios, not directly competing variants of the same mechanical product.
Cross-Talk, Side Loading, and Decoupling
Cross-talk has a specific meaning in multi-axis force/torque measurement: loading one axis creates unwanted output in another measured channel. A six-axis sensor can be characterized through a multi-channel calibration matrix and residual cross-talk measurements.
A conventional single-axis load cell generally has one primary output. Its behavior under lateral forces or bending moments is better evaluated through side-load sensitivity, eccentric-loading error, allowable parasitic loading, and mechanical protection limits.
Digital decoupling can improve the separation of measurement components in an appropriate sensor architecture, but it does not eliminate the need for mechanical alignment or establish an allowable bending moment.
Practical design implication: If a machine must independently measure forces in multiple directions or measure applied torques, a dedicated multi-axis force/torque sensor is the appropriate architecture to evaluate. A standard S-beam or shear-beam load cell should not be treated as a multi-axis sensor merely because its elastic body experiences complex loading.
Nonlinearity and Accuracy Claims Need Comparable Definitions
A specification such as ±0.02% FS nonlinearity describes one performance characteristic under defined measurement conditions. It is not automatically equivalent to total measurement uncertainty, repeatability, hysteresis, creep, or the installed system’s overall accuracy.
Zhihe’s ZH-ST1 provides separate nonlinearity, hysteresis, and repeatability figures, while Nanhua’s NH3S3 provides its own performance table. Comparing these figures is useful only when the rated capacities, test methods, environmental conditions, and measurement definitions are aligned.
For static weighing applications, OIML R 60:2021 defines metrological requirements and evaluation procedures for load cells used in regulated measuring instruments. A general product-category description does not establish that an individual model has a particular OIML certificate.
For force-proving instruments used to verify uniaxial testing machines, ISO 376:2011 addresses calibration and classification. Its application is different from the assessment of ordinary industrial weighing components.
How to Match the Manufacturer to the Project
Compact Force Feedback and Machine Integration
Start with SAINTBOND when the design involves a relatively small force range, a constrained sensor envelope, and an explicit choice between bridge output and digital signal integration. Define the loading arrangement and control-system interface before choosing between its conventional S-type and integrated uniaxial product directions.
General Tension/Compression Testing
Huzhou Zhihe and Zhejiang Nanhua provide useful S-type configurations for controlled axial force measurement. Zhihe’s installation guidance and explicit performance values are especially relevant where fixture alignment and repeatability are important. Nanhua adds smaller force-sensor constructions alongside its S-type range.
High-Capacity Industrial Compression
Aerospace Nanyang’s CP-11 is a more natural engineering starting point for heavy compression loading than miniature S-beam designs. Its double-ball-head construction and 30/40/50 t nominal capacities direct attention toward structural supports, mechanical contact, and heavy-duty weighing integration.
Mobile Equipment and Environmental Exposure
For agricultural equipment or onboard weighing, Ningbo Hechang’s beam-type product range deserves consideration. Environmental sealing, mounting restraint, changing load distribution, and mechanical fatigue may matter more than minimizing the dimensions of the sensing body.
Broader Industrial Weighing Programs
Keli offers a range of established sensor structures that can support component selection across different machine types. Osen provides an additional conventional S-type sourcing path for Ningbo-based industrial weighing and tension-measurement applications.
RFQ Questions That Improve Single-Axis Load Cell Selection
A useful request for quotation should distinguish the measurement requirement from the commercial product name. The following questions help turn an initial supplier shortlist into a technically comparable procurement decision.
- What is the exact measured quantity? Identify the required tension, compression, or reversible axial force and state the normal, peak, and overload conditions.
- How will force enter the sensor? Provide the mounting drawing, contact geometry, thread dimensions, fixture stiffness, and anticipated eccentricity or angular misalignment.
- Which nominal capacity provides suitable operating margin? Compare the required measurement resolution and overload resistance without assuming the highest rated capacity produces the best low-force measurement.
- What parasitic loads can occur? Define expected lateral forces, bending moments, vibration, or rotation. Establish the allowable installed error and protection requirements for those conditions.
- What measurement performance is required? Specify acceptable nonlinearity, hysteresis, repeatability, creep, temperature behavior, and combined uncertainty using consistent definitions.
- What electrical interface does the controller support? Identify excitation voltage, bridge sensitivity, analog conditioning, digital communication protocol, sampling rate, cable arrangement, and grounding requirements.
- What calibration evidence is appropriate? State the required measurement range, calibration points, loading direction, uncertainty, and traceability information. The documentation scope should fit the actual measurement application.
- What conditions must the installed system withstand? Include operating temperatures, moisture exposure, sealing, washdown, impact, cable movement, and expected maintenance conditions.
Frequently Asked Buyer Questions
Is a single-point load cell the same as a single-axis load cell?
No. Single-point refers to a structural design commonly used for platform weighing with a defined tolerance for load position within the intended platform geometry. Single-axis describes the primary force-measurement direction. A single-point load cell generally provides one principal weighing output, but its mechanical design and applications differ from an S-type axial force sensor.
Should a single-axis load cell have a cross-talk percentage?
Not necessarily. Cross-talk percentages are most meaningful for sensors with multiple independently measured channels. For a conventional uniaxial sensor, the more useful measures often concern side-load sensitivity, eccentric loading, and the influence of unintended bending moments on its single output.
Which Zhejiang supplier is suitable for very high compression loads?
Aerospace Nanyang’s published CP-11 range of 30, 40, and 50 t makes it a relevant option for high-capacity compression weighing. The correct choice still depends on load introduction, support geometry, environmental conditions, and the required weighing performance.
Which supplier is suitable for compact industrial force sensing?
SAINTBOND’s LC226B and MX1001 product directions are useful starting points where compact uniaxial measurement and electrical integration matter. Zhejiang Nanhua also offers smaller force-sensor constructions such as the NH-3B1. The mechanical envelope and measurement interface should determine which architecture is appropriate.
Does an OIML load-cell classification apply to every force sensor from the same company?
No. Metrological classification and certification must be interpreted in relation to the relevant load-cell model and its documented scope. A weighing-system requirement under OIML R 60 is not interchangeable with calibration requirements for a force-proving instrument under ISO 376.
Final Supplier Selection: Match the Force Path Before Comparing Catalogs
These seven Zhejiang manufacturers represent distinct choices rather than interchangeable suppliers. SAINTBOND offers a practical first route for compact force measurement and OEM electrical integration; Zhihe is strong in documented S-type configurations and axial mounting guidance; Aerospace Nanyang addresses much larger compression capacities. Nanhua provides strain-gauge and miniature options, while Hechang, Keli, and Osen cover different industrial weighing and conventional force-sensing needs.
For the final procurement decision, the highest-value comparison is not the largest advertised product range or the lowest nominal nonlinearity figure. It is the connection between the sensor’s intended measurement axis, actual mechanical load path, capacity, conditioning electronics, and calibration evidence. A technically matched single-axis load cell can simplify a system considerably; a poorly matched one can introduce errors that no product-catalog specification alone will resolve.
Discuss Your Single-Axis Load Cell Requirement with SAINTBOND
For compact force sensors, S-type tension/compression load cells, and OEM measurement integration, Ningbo SAINTBOND Intelligent Technology Co.,Ltd. is our recommended first contact.
Share your intended force range, installation geometry, output requirements, and equipment application to begin a focused product-selection discussion.
Вам нужны переносные весы для осей, промышленные тензодатчики, датчики силы, весовые индикаторы и системы динамических измерений? Ищете решения для своего проекта?
Получите цены напрямую от производителя и техническую поддержку от наших экспертов в течение 24 часов.
Запросить быстрое ценовое предложение