100 kg Load Cell Price in India: Integration Checks

Reference Standard: Relevant force and torque sensor performance and integration testing standards should be selected for the actual machine, robot, and measurement task; the...

100 kg Load Cell Price in India: Integration Checks

Reference Standard: Relevant force and torque sensor performance and integration testing standards should be selected for the actual machine, robot, and measurement task; the available product evidence does not identify a project-specific mandatory standard.

A search for 100 kg load cell price in India should not begin with the price alone. The first question is whether the quoted sensor is technically suitable for the intended measurement system, because the catalog-listed LCX6013 is not simply a generic single-axis 100 kg load cell: it is identified as a six-axis force moment sensor / multi-axis load and torque cell, with Fz, Fy, and Fx each specified at 100 kg.

For supplier evaluation, confirm the exact sensor configuration, mechanical interface conditions, force path, operating environment, and cable-routing requirements before comparing quotations. A lower price has little value if the proposed sensor cannot be integrated correctly into the intended robot or automation fixture.

100 kg Load Cell Price in India Starts With Integration

The phrase “100 kg load cell” can describe very different sensing architectures. In the verified catalog evidence, the LCX6013 belongs to the Multi-Axis Load Cell and Six-Axis Load Cell category. Its 100 kg specification is therefore part of a multi-axis measurement configuration rather than proof that it is interchangeable with every load cell carrying the same nominal capacity.

Several verified parameters help identify what is actually being evaluated:

Catalog-listed characteristic LCX6013 specification
Fz, Fy, Fx 100 kg
Output sensitivity 0.5–2.0 mV/V
Excitation voltage 3–10 V
Comprehensive accuracy 0.1–0.5% F.S.
Não-linearidade 0.3% F.S.
Lagging 0.3% F.S.
Repetibilidade 0.3% F.S.
Operating temperature -20 to +80°C
Safety load 150% F.S.
Ultimate overload 200% F.S.
Degree of protection IP65
Cable size Φ6 × 3000 mm
Dimensions Φ75 × 30 mm

These values should be used to identify the offered model and establish whether a supplier is quoting a technically comparable configuration. They should not be used to infer a market price in India, and no verified India-specific price, inventory level, delivery time, distributor status, or local-office information is available in the supplied evidence.

One additional point deserves confirmation during supplier evaluation. The product material description contains an unresolved inconsistency: one section states aluminum alloy, while the technical table lists alloy steel. Rather than selecting either description as authoritative, a buyer should ask the supplier to confirm the construction material of the exact configuration being quoted.

Industrial weighing sensor installation context for evaluating mounting space and force transfer

Can the Sensor Fit the Intended Robot or Automation Interface?

Mechanical compatibility is the next filter. The catalog identifies applications including industrial robots, cooperative robots, medical robots, and industrial automation measurement, but an application label alone does not prove that a sensor will fit a particular machine.

A useful inquiry therefore describes the installation rather than sending only a capacity requirement.

Start with the installation location. A sensor mounted near a robot wrist, end-effector, automated fixture, or measurement station must coexist with surrounding structures. The catalog-listed LCX6013 dimensions of Φ75 × 30 mm give the buyer a verified envelope to compare with available space, but the evidence does not specify a bolt pattern, mounting-hole geometry, connector arrangement, or communication interface. Those details must be confirmed separately before design approval.

Next, describe the force-transfer direction. In multi-axis measurement, the sensor becomes part of the structural path through which forces and moments travel. The buyer should show where the load originates, which structure transfers it into the sensor, and what component receives it on the opposite side. This is more useful than simply stating “100 kg” because it allows the proposed sensing arrangement to be evaluated as part of the machine.

Fixture geometry matters as well. Brackets, adapters, tooling, end-effectors, contact surfaces, and surrounding structures can change how forces reach the sensing element. A mechanically convenient adapter can still create an undesirable force path if it shifts the point of application or allows another structure to bypass part of the intended measurement path.

Cable routing also deserves early attention. The catalog lists a Φ6 × 3000 mm cable, so the proposed installation needs enough space for routing without creating an impractical path through moving joints or nearby hardware. The evidence does not establish a minimum bend radius or connector specification, so those values should not be assumed.

Industrial sensor and surrounding mechanical hardware illustrating integration-space planning

Load Path and Off-Axis Forces Change the Evaluation

A multi-axis sensor does more than detect one simple vertical load. Its purpose is to distinguish forces and moments acting in different dimensions, which makes the quality of the load path particularly important.

The supplied product evidence specifically identifies off-axis forces as a potential source of coupling between measured dimensions and resulting measurement error. In practical terms, a force intended primarily for one measurement direction can interact with other sensing dimensions when the mechanical structure introduces unintended loading.

That does not mean every off-axis component indicates a defective sensor. In a robot or automation system, multi-directional loading may be part of the real measurement task. The key supplier-evaluation question is whether the proposed installation transfers those forces through the sensor in the way the measurement system expects.

Consider the difference between a clean load path and an uncontrolled one. In a clean arrangement, fixtures are designed so the sensor receives the intended mechanical input through defined interfaces. In an uncontrolled arrangement, misaligned brackets, asymmetric contact, structural deflection, surrounding hardware, or poorly planned force-transfer points can alter how the sensor is loaded. The buyer may then see interaction between measurement dimensions that originates partly in the installation rather than solely in the sensing element.

The LCX6013 description states that it uses a structural decoupling design intended to reduce coupling between measured dimensions. That feature is relevant to supplier evaluation because coupling control is directly related to the intended multi-axis function. However, the available evidence does not provide an application-specific coupling percentage or guarantee performance in a particular robot installation. A supplier should therefore explain how the proposed sensor configuration and the buyer’s fixture design work together.

Integration Signs to Investigate Before Final Approval

  • The proposed fixture introduces a visibly offset or indirect force path relative to the intended sensing interface.
  • Surrounding brackets, tooling, or structural members may carry part of the load around the sensor.
  • Cable routing, adapter geometry, or available space forces the sensor into a mechanically compromised installation position.

This is why supplier evaluation should include drawings or clear installation information whenever possible. A quotation that identifies the sensor but ignores how it will be loaded leaves an important technical question unanswered.

Integration Information to Confirm Before Comparing Prices

An integration-ready inquiry gives the supplier enough information to evaluate the sensing system as a mechanical and measurement assembly. It does not need to become a complete machine-design package, but it should define the conditions that materially affect sensor suitability.

First, identify the exact measurement task. State whether the sensor is intended to observe multiple force directions, torque or moment behavior, robotic interaction, automation-process forces, or another defined function. This helps prevent a generic capacity match from being mistaken for a complete technical match.

Second, provide the installation envelope. The catalog verifies a Φ75 × 30 mm dimension for the LCX6013, but the buyer still needs to determine whether that envelope is compatible with the surrounding machine structure. Supplier drawings should be reviewed before machining permanent adapters or fixtures.

Third, describe the expected force directions and load path. A simple sketch showing where forces enter and leave the sensing assembly can be more informative than a long written description. For a multi-axis sensor, this information helps the supplier assess whether the proposed structure could introduce unintended loading or coupling.

Fourth, document the fixture and mounting constraints. If an existing robot wrist, tool plate, test fixture, or automated mechanism cannot be modified freely, say so before a quotation is finalized. The supplier can then evaluate the actual integration problem rather than an idealized one.

Fifth, specify the operating environment. The catalog lists an operating temperature range of -20 to +80°C and IP65 protection for this model. Those verified characteristics can be compared with the planned environment, but they should not be expanded into claims about chemical resistance, washdown suitability, outdoor life, or other environmental properties that are not documented.

Sixth, clarify the electrical measurement requirements. The verified sensitivity is 0.5–2.0 mV/V with 3–10 V excitation. These values help establish the sensor’s signal class, but the supplied evidence does not specify the buyer’s amplifier, data-acquisition equipment, controller compatibility, or communication protocol. Those system-level interfaces require separate confirmation.

Inline force sensor cable connection context for planning routing and surrounding equipment clearance

Items to Confirm With the Supplier

  1. Confirm the exact model or configuration being quoted.
  2. Confirm that the intended measurement task matches the proposed multi-axis sensing function.
  3. Provide the available mechanical installation envelope and surrounding fixture geometry.
  4. Show the expected force directions and how loads enter and leave the sensor assembly.
  5. Identify mounting restrictions, adapters, tooling, or robot-interface constraints.
  6. Confirm cable-routing space and any motion-related routing limitations.
  7. Compare the documented operating environment with actual temperature and protection requirements.
  8. Ask how the proposed configuration manages multi-axis coupling in the planned installation.
  9. Resolve the catalog inconsistency between aluminum-alloy and alloy-steel material descriptions.
  10. Review the technical match before treating competing prices as equivalent offers.

This approach keeps price comparison in the correct sequence. First establish that the proposed sensor can perform the required measurement and fit the machine. Only then does the commercial comparison become meaningful.

Ningbo SAINTBOND Intelligent Technology Co.,Ltd. is described in the supplied company information as a dynamic measurement technology company for pressure, force, torque, and acceleration that designs, manufactures, markets, and services industrial products and weighing systems. Buyers evaluating a multi-axis sensing project can use the company’s measurement technology website as a starting point for discussing the technical requirements that should accompany an inquiry.

Frequently Asked Questions (FAQ)

How does a torque load cell work?

A torque-capable sensor converts mechanical deformation caused by an applied moment into an electrical measurement signal. In a multi-axis device, torque or moment measurement is evaluated alongside forces in other directions, so mechanical installation and control of inter-dimensional coupling become important parts of the measurement system.

How should a custom load cell requirement be specified?

Define the measurement task, force directions, available installation space, fixture geometry, operating environment, signal requirements, cable-routing conditions, and expected interaction with surrounding machinery. A capacity value alone is insufficient when the application requires multi-axis measurement or a tightly constrained mechanical interface.

Precisa de balanças portáteis para eixos, células de carga industriais, sensores de força, indicadores de pesagem e sistemas de medição dinâmica? Soluções para o seu projeto?

Obtenha preços diretos do fabricante e assistência técnica dos nossos especialistas no prazo de 24 horas.

Solicite um orçamento rápido

Deixe um comentário