100 kg Load Cell Price: What to Check Before Quoting

Reference Standard: Application-specific force-sensor performance and environmental test standards should be confirmed for the intended robotics or automation system; the supplied product evidence does...

100 kg Load Cell Price: What to Check Before Quoting

Reference Standard: Application-specific force-sensor performance and environmental test standards should be confirmed for the intended robotics or automation system; the supplied product evidence does not identify a specific standard.

100 kg Load Cell Price Starts With Sensor Identity

A search for 100 kg load cell price does not identify a single technical product. The verified LCX6013 is a six-axis force moment sensor / multi-axis load and torque cell with Fz=Fy=Fx capacities listed as 100kg, while Mx=My=Mz are separately listed as 2kg; the supplied product section does not publish a price.

That distinction matters before any quotation request. A capacity phrase such as “100 kg load cell” can sound like a simple single-axis weighing component, but the LCX6013 is documented as a multi-axis sensing device. The 100kg value therefore belongs to the three listed force axes of this specific model and should not be treated as proof that every 100kg load cell found in a search is technically comparable.

For buyers, the practical first step is to identify the measurement architecture before discussing cost. A quotation for a multi-axis force/moment sensor cannot be interpreted responsibly from capacity alone, because the required sensing dimensions, electrical interface, environmental conditions, package size, and application context define the technical object being requested.

What the 100 kg Rating Means on the LCX6013

The LCX6013 is listed in the supplied catalog evidence as a Six-Axis Force Moment Sensor / Multi-Axis Load & Torque Cells product. Its technical table shows Fz=Fy=Fx: 100kg and separately lists Mx=My=Mz: 2kg. The evidence does not redefine those moment-axis values into another unit, so they should be preserved exactly as documented rather than converted or reinterpreted.

This makes the product identity more specific than the search keyword. The phrase “100 kg” describes the verified capacity of the model’s three force axes, not the entirety of its measurement configuration. A buyer who asks only for “100 kg” could therefore omit one of the most important facts about the intended device: it is designed to observe multiple force and moment dimensions rather than only one load direction.

The same product evidence connects the LCX6013 with industrial robots, cooperative robots, medical robots, and industrial automation measurement. Those application contexts help explain why a multi-axis configuration can matter. In a robotic or automated mechanism, forces may not arrive in one perfectly isolated direction. General multi-axis measurement practice recognizes that off-axis forces and coupling between dimensions can influence measured results. The supplied evidence specifically describes a structural decoupling design with small coupling between dimensions, which is relevant to the identity of this sensor architecture.

Compact force sensor hardware illustrating multi-axis measurement integration in robotics and industrial automation

This does not justify a claim that multi-axis architecture makes the LCX6013 more or less expensive than another product. No price relationship is verified. It does, however, show why a buyer should avoid comparing a generic 100kg capacity listing with a six-axis sensor as though the two were automatically equivalent.

Verified Specifications That Define This Six-Axis Sensor

The price inquiry becomes more meaningful when it identifies the exact verified specification set. For the LCX6013, the supplied technical data lists 0.5-2.0mV/V output sensitivity and 3-10V excitation voltage. These electrical characteristics are part of the interface that must match the intended signal-conditioning or measurement system.

The catalog also lists 0.1-0.5%F.S comprehensive accuracy, 0.3%F.S nonlinear, 0.3%F.S lagging, and 0.3%F.S repeatability. Creep is listed as 0.02%F.S/10℃ over 30 minutes, while temperature sensitivity drift and zero temperature drift are each listed as 0.03%F.S/10℃. These values should be treated as specifications of this catalog-listed model, not as general specifications for all 100kg load cells.

Electrical resistance data further defines the sensor: both input and output impedance are listed as 350/700±5Ω, and insulation resistance is given as greater than 2000MG/100VDC. The evidence also identifies a -10 to +70℃ temperature compensation range and a -20 to +80℃ operating temperature range.

Mechanical and environmental specifications add another layer of identity. The LCX6013 lists a 150%F.S safety load, 200%F.S ultimate overload, and IP65 degree of protection. Its cable size is listed as Φ6×3000mm, and the overall dimension is Φ75×30mm. These are not optional descriptive details when the goal is to identify what should be priced; they help establish whether the quoted item is the same technical configuration.

One source inconsistency should remain visible rather than being silently resolved. The descriptive PDF content states aluminum alloy, while the technical parameter table separately lists alloy steel under material science. The supplied evidence does not establish which entry is controlling. A buyer should therefore ask the manufacturer to confirm the current material designation for the exact LCX6013 configuration being quoted.

Specification Points That Need Confirmation Before Ordering

  • A quoted item uses the same six-axis force/moment architecture, rather than only sharing a 100kg capacity phrase.
  • The supplier confirms the material designation, because the supplied PDF contains an aluminum-alloy versus alloy-steel discrepancy.
  • The intended electronics are compatible with the listed excitation, sensitivity, and impedance values.

Sensor Configuration Changes What “Comparable” Means

Capacity is often the fastest search filter, but it is not enough to establish technical equivalence. In the verified LCX6013, the force-axis capacities sit inside a six-axis sensing structure. That architecture introduces requirements that a single-axis load cell comparison may not address at all, including the number of measured dimensions and the behavior of the structure when loads act away from the primary direction.

In general multi-axis measurement, dimensional coupling is the unwanted influence of one force or moment component on another measured channel. The supplied product description addresses this at the design level by stating that the LCX6013 uses structural decoupling design and has small coupling between dimensions. No coupling coefficient is provided, so the evidence supports the qualitative design statement but not a numerical claim about the degree of separation.

For a robotics buyer, this distinction is practical rather than theoretical. A cooperative robot, medical robot, or industrial automation fixture may need measurement across several force and moment dimensions at once. If the real requirement is six-axis observation, then a generic product that only matches the 100kg force capacity may still represent a different measurement task.

The same logic applies to environmental and packaging constraints. An IP65 rating, a -20 to +80℃ operating range, and the listed Φ75×30mm dimensions help define where and how the sensor can be integrated. A buyer does not need to assume that each of these specifications directly changes price. Instead, these details ensure that the quotation is attached to the correct technical object.

Wired industrial weighing hardware illustrating the importance of cable routing and system integration when defining a sensor quotation

That is the key difference between a capacity-only search and a specification-led inquiry. The first focuses only on the 100kg figure. The second identifies a particular sensing architecture, measurement scope, interface, environment, and mechanical envelope, then asks for the current commercial offer for that defined configuration.

Technical Details to Include in a Price Inquiry

A useful inquiry should make it difficult for either side to misunderstand what is being requested. For this model, the starting point is the exact product identity: LCX6013 or an explicitly requested equivalent six-axis force/moment architecture. The inquiry should state the verified 100kg force-axis requirement and specify which force and moment dimensions the application needs to measure.

Electrical requirements should also be included. The LCX6013 evidence lists 3-10V excitation and 0.5-2.0mV/V output sensitivity, along with 350/700±5Ω input and output impedance. If the buyer already has an amplifier, controller, data-acquisition device, or robot interface, compatibility should be checked against the intended system rather than assumed from capacity alone.

Environmental conditions should be stated where they matter. If the application depends on the catalog-listed IP65 protection or the -20 to +80℃ operating range, those requirements belong in the inquiry. Mechanical integration can be described using the verified Φ75×30mm sensor dimension and Φ6×3000mm cable size when those constraints affect fit or routing.

The application context is also useful. The supplied evidence identifies industrial robots, cooperative robots, medical robots, and industrial automation measurement as relevant contexts for the LCX6013. Naming the actual application helps the manufacturer understand why the buyer is asking for multi-axis sensing rather than a generic single-capacity device.

Information to Send With an LCX6013 Price Request

  1. Identify LCX6013 or state that an equivalent six-axis force/moment sensor is required.
  2. State the 100kg Fz=Fy=Fx force-axis requirement exactly as needed.
  3. Define which force and moment dimensions must be measured.
  4. Confirm compatibility with 3-10V excitation and 0.5-2.0mV/V sensitivity.
  5. Note any requirement for the catalog-listed IP65 protection and operating-temperature range.
  6. Include relevant mechanical envelope and cable-routing constraints.
  7. Describe the intended robotics or industrial-automation measurement context.
  8. Ask for confirmation of the current material designation because the supplied PDF contains conflicting material entries.
  9. Request the current quotation and product information rather than assuming a published list price.

The supplied PDF identifies Ningbo SAINTBOND Intelligent Technology Co.,Ltd. as a China load cell and force sensor manufacturer and verifies the presence of the LCX6013 product. It does not publish a price for this product section. Buyers seeking current product and quotation information can use the company’s load cell and force sensor website as the contact starting point, while keeping the inquiry anchored to the exact technical configuration required.

Frequently Asked Questions (FAQ)

How does a load cell function?

A load cell converts an applied mechanical load into an electrical signal that can be measured and interpreted by connected electronics. In a multi-axis sensor such as the verified LCX6013, the important distinction is that several force and moment dimensions are observed within one sensing structure rather than treating the device as a single-axis capacity element.

ポータブル軸重計、産業用ロードセル、力センサー、計量表示器、動的測定システムをお探しですか?お客様のプロジェクトに最適なソリューションをご提案いたします。

メーカー直販価格をご利用いただけるとともに、当社の専門家による技術サポートを24時間以内にご提供いたします。.

お見積もりのご依頼

コメントする