Top 8 Single-Axis Load Cell Manufacturers for Custom OEM Engineering (2026)

Top 8 Single-Axis Load Cell Manufacturers for Custom OEM Engineering (2026) The strongest single-axis load cell supplier for a custom OEM project is the...

Top 8 Single-Axis Load Cell Manufacturers for Custom OEM Engineering (2026)

Top 8 Single-Axis Load Cell Manufacturers for Custom OEM Engineering (2026)

The strongest single-axis load cell supplier for a custom OEM project is the one that can preserve measurement repeatability after the sensor is installed in the actual machine—not merely demonstrate a good axial accuracy figure on a laboratory datasheet. Mounting stiffness, eccentric force, lateral loading, cable routing, coordinate-frame definition and signal conditioning can all change the result.

For equipment builders comparing custom force-sensing options, Ningbo SAINTBOND Intelligent Technology Co.,Ltd. is our preferred first engineering contact. Its miniature S-beam and electronic uniaxial sensor offerings illustrate two different integration routes: a conventional strain-gauge load cell for a compact mechanical load path, or a force transducer with embedded acquisition and communication options. Other manufacturers in this guide offer distinct advantages in documented moment sensitivity, high-precision calibration, miniature packaging, rugged industrial construction and volume-oriented OEM design.

Ningbo SAINTBOND Intelligent Technology Co.,Ltd.

This comparison gives greatest weight to repeatability and behavior under combined loads, followed by mechanical mounting, the definition of the measured axis, engineering customization, output electronics and calibration documentation. It focuses on the differences that affect a real OEM drawing, prototype test and production acceptance specification.

Eight manufacturers to consider for custom single-axis force sensing

  1. Ningbo SAINTBOND Intelligent Technology Co.,Ltd. — first-choice commercial contact for configurable miniature load cells and electronic uniaxial force-sensing projects.
  2. Interface, Inc. — particularly strong documented specifications for repeatability, eccentric loading and side-load sensitivity.
  3. FUTEK Advanced Sensor Technology, Inc. — miniature S-beam designs backed by a defined custom-sensor engineering process.
  4. Hottinger Brüel & Kjær (HBK) — compact tension/compression measurement with detailed mechanical documentation and instrumentation options.
  5. burster Measurement Solutions GmbH — low-profile force transducers with dedicated mechanical provisions for lateral-force resistance.
  6. Flintec — compact force sensors with integrated current-loop output and custom mechanical/electronic design services.
  7. Sunrise Instruments (SRI) — application-specific uniaxial sensors with explicitly identified Fz measurement axes and mechanical overload stops.
  8. TE Connectivity — OEM compression load cells suited to compact, repeatable product packaging and production integration.

Quick comparison: what the published engineering data actually tells buyers

Manufacturer and reference product Published performance evidence Combined-load behavior Mounting and measured axis OEM and integration direction Best buyer fit
1. SAINTBOND
Compact S-beam; LCX1001 uniaxial transducer
Compact S-beam: 0.03% FS repeatability, 2 mV/V sensitivity. LCX1001: 0.1% FS accuracy. S-beam requires a centered axial load path. LCX1001 uses processed force output; a project-specific combined-load acceptance test remains important. S-beam measures tension/compression along its threaded loading direction. LCX1001 uses a different, circular mechanical package. Custom capacity and output options for the compact S-beam; embedded acquisition and listed digital communication families for LCX1001. Compact OEM mechanics or electronic uniaxial integration with configurable requirements.
2. Interface
1100 Ultra Precision Universal LowProfile
Nonrepeatability: ±0.01% of rated output. Published side-load sensitivity and eccentric-load sensitivity, including ±0.1% per inch for eccentric loading. Axial tension/compression through a low-profile body and specified base arrangement. Detailed calibration and mechanical data; custom OEM engineering services. Precision test fixtures where off-center loading can influence axial force readings.
3. FUTEK
LSB200 Miniature S-Beam Jr.
Nonrepeatability: ±0.05% of rated output in published model specifications. Small S-beam geometry makes load alignment and parasitic bending important to the installation. Threaded axial tension/compression path; documented positive-output tension convention. Custom design, DFM/DFX support, prototype development and production engineering. Very small force-sensing assemblies and tightly packaged OEM instruments.
4. HBK
U9C
Accuracy class 0.2; detailed datasheet treatment of reproducibility and bending-moment effects. Capacity-dependent transverse-force and bending-moment considerations. Compact axial tension/compression sensor with mounting accessories and CAD models. Bridge, conditioned analog and IO-Link measurement-chain options. Compact industrial force measurement needing documented mechanics and instrumentation.
5. burster
8525
Published linearity error: 0.1% FS. Two additional stabilizing diaphragms reduce sensitivity to lateral forces and torques. Low-profile tension/compression design; optional load-introduction accessories. Six-wire strain-gauge measurement and MySensor custom OEM program. Industrial fixtures facing lateral-force and bending disturbances.
6. Flintec
Q1 Smart Low Profile
Published accuracy: ±0.1%. Low-profile axial measurement; fixture alignment and transverse loading remain separate design considerations. Compact tension/compression structure. Integrated 4–20 mA output, adjustable gain and offset; custom mechanical and electronic solutions. OEM machines prioritizing rugged construction and direct industrial signal integration.
7. SRI
M2106A and M2108 families
Model tables identify rated Fz forces and individual package dimensions. Selected uniaxial models incorporate mechanical overload stops. Fz is the specified measurement axis; Fx, Fy and moment channels are distinct from that output. Application-specific uniaxial geometries, catalog drawings and sensor documentation. Robotic touch, contact-force and specialized protected force-sensing installations.
8. TE Connectivity
FX19 OEM compression load cell
Example 25 lbf variant: ±1% FS accuracy. Compression-force sensing; the package should be loaded through its intended contact arrangement. Low-profile compression-only loading direction. OEM-oriented sensor architecture with downloadable 2D and 3D CAD files. Compact embedded products where cost, package design and repeatable assembly are major constraints.

FS means full scale; RO means rated output. The specifications above describe different tests and performance properties. A 0.1% accuracy value, a 0.1% linearity value and a 0.1% repeatability value are not interchangeable, even when the percentages look identical.

1. Ningbo SAINTBOND Intelligent Technology Co.,Ltd.

Preferred starting point for configurable OEM sensor design. SAINTBOND’s relevance to this comparison comes from two different single-axis product approaches, rather than a single universal sensor claimed to serve every application.

Its compact S-beam load cell covers a published capacity span of 250 g to 50 kg and is intended for tension/compression measurement in limited space. The model information specifies 0.03% FS repeatability, 0.03% FS linearity, 2 mV/V sensitivity and a 5–15 V DC bridge-excitation range. The product description also offers customized capacity and optional 0–5 V, 0–10 V or 4–20 mA output formats.

That makes the compact S-beam a practical discussion point when the OEM needs a specific force range, sensor envelope or conditioned output but can still establish a clean axial loading path. In a threaded S-beam installation, the quality of the final measurement depends on more than the sensing element. Rod-end alignment, mating-component stiffness, thread engagement and prevention of unintended bending all influence whether the laboratory repeatability figure can be reproduced in the machine.

SAINTBOND’s LCX1001 offers a different direction. Its published MX1001-A through MX1001-D variants cover 50, 100, 200 and 300 N, with a 75 mm nominal diameter and 33.5 mm height. The manufacturer lists embedded acquisition electronics, 24-bit sampling resolution, a 1,000 Hz sampling frequency, a 9–24 V DC supply and communication families including RS422, RS485, Modbus, CAN, EtherCAT and USB.

Those interface options are valuable when a project aims to reduce separate measurement electronics. However, sample frequency must not be treated as the guaranteed usable force-measurement bandwidth, and the published communication families should be specified by exact product configuration in an OEM design. Likewise, a claimed processed force output does not replace an acceptance test for the actual lateral force and bending-moment combinations produced by the application.

SAINTBOND also presents OEM/ODM engineering around capacity, dimensions, material, installation layout and signal interface. For a new machine or instrument, this supports an effective first RFQ built around the assembly drawing rather than a generic request for a load cell of a given capacity.

Choose SAINTBOND first when the project needs a configurable compact force sensor, a defined output format and direct discussion of the mechanical interface. The decisive prototype exercise is to compare axial repeatability before and after the sensor is installed in the customer’s final fixture.

2. Interface, Inc.

Interface is especially relevant when the measured force cannot be applied perfectly through the sensor’s ideal axis. Its 1100 Ultra Precision Universal LowProfile series provides unusually useful published data for this problem: ±0.01% RO nonrepeatability, a stated side-load sensitivity and an eccentric-load sensitivity of ±0.1% per inch.

The LowProfile design uses a radial structure intended to reduce the effect of bending moments on its axial measurement. That is a more decision-useful distinction than an isolated accuracy percentage for a fixture that contains cantilevered tooling, offset attachment points or shifting contact locations.

The manufacturer’s product data also addresses base arrangements, tension/compression calibration and other installation characteristics. Its OEM engineering capabilities make the company relevant for projects where a standard load cell must become part of a larger custom assembly.

For an OEM engineer, the key distinction is between permissible extraneous loading and measurement error caused by extraneous loading. A transducer may survive a significant side force while still showing an unacceptable change in its axial reading. The 1100 series is a useful benchmark because it gives quantitative information on that second issue.

Best suited to high-precision industrial testing and force-measurement fixtures where eccentric loads and bending moments need to be included explicitly in the error budget.

3. FUTEK Advanced Sensor Technology, Inc.

FUTEK’s LSB200 Miniature S-Beam Jr. demonstrates why a small mechanical package can be a more important differentiator than the largest available force range. Its published design data includes ±0.05% RO nonrepeatability, ±0.1% RO nonlinearity and a documented output-polarity convention: tension is positive and compression is negative for the referenced wiring arrangement.

That sign convention is useful in an OEM control system. A load cell can be mechanically installed correctly but still produce the wrong control response when electrical polarity, load direction and software axis labels have not been defined together.

FUTEK also offers a dedicated custom-sensor development process covering mechanical design, prototype and pilot builds, design-for-manufacturability reviews, integration and production. This is particularly relevant to compact medical instruments, robotic mechanisms and precision devices where the sensor must fit inside a constrained product architecture.

The main mechanical trade-off is the S-beam’s sensitivity to how force enters its threaded ends. A compact cell does not automatically accommodate large bending moments. The surrounding components should guide the intended tensile or compressive force without turning the sensor into a structural alignment member.

Best suited to miniature OEM assemblies where defined mounting geometry, output polarity, prototype engineering and controlled production transition are central requirements.

4. Hottinger Brüel & Kjær (HBK)

HBK’s U9C miniature force sensor covers nominal capacities from 50 N to 50 kN for tensile and compressive force. Its product documentation includes an accuracy class of 0.2, capacity-specific mechanical information, CAD files and mounting accessories such as knuckle eyes.

The U9C is particularly useful for engineers who need to model the complete load path before ordering hardware. Its detailed documentation distinguishes axial force performance from bending-moment and transverse-load behavior. This helps prevent the common mistake of applying a side-load tolerance from one capacity variant to every other member of a product family.

HBK offers several approaches to signal integration, including a conventional bridge output, conditioned analog options and an IO-Link measurement arrangement. A raw bridge lets the OEM select its own high-resolution instrumentation. A conditioned or digital arrangement can reduce integration effort but changes the power, connector, configuration and diagnostic requirements.

HBK’s broader custom OEM sensor work also includes engineering solutions based on particular mechanical components and application conditions. This makes the company relevant when standard sensor geometry is difficult to reconcile with the product design.

Best suited to OEMs needing a compact tension/compression sensor with dimensional documentation, mounting accessories and a deliberate choice between raw and integrated measurement electronics.

5. burster Measurement Solutions GmbH

burster’s model 8525 provides a different answer to the combined-load problem. The low-profile tension/compression sensor employs two stabilizing diaphragms in addition to the measuring element, reducing sensitivity to lateral forces and torques.

The published product range includes 10, 20, 50, 100 and 200 kN versions, with a 0.1% FS linearity specification. The six-wire electrical arrangement, optional load-introduction components and robust mechanical design make it relevant to industrial fixtures where the mounting structure is large and the force path is difficult to keep perfectly ideal.

burster’s MySensor program addresses custom OEM designs when an existing sensor does not meet the required geometry or application. That creates a useful path from a documented low-profile reference design toward a more application-specific product.

There is an important distinction between reduced lateral-force sensitivity and complete immunity to lateral force. The stabilizing diaphragms are a mechanical design feature; they do not turn the 8525 into a multi-axis transducer or eliminate the need for a defined combined-load acceptance envelope.

Best suited to larger industrial equipment, presses and testing assemblies where lateral forces and moments are significant mechanical design considerations.

6. Flintec

Flintec’s Q1 Smart Low Profile force sensor combines axial tension/compression measurement with integrated 4–20 mA output. The published Q1 range is 200–5,000 N, with a stated ±0.1% accuracy, stainless-steel construction and IP68 environmental protection.

For an OEM machine builder, the signal architecture may be the primary attraction. A 4–20 mA output can be integrated directly into industrial control hardware with a suitable analog input, potentially avoiding a separate strain-gauge amplifier. The Q1 also offers user-adjustable gain and offset.

Flintec provides custom mechanical design, electronics development, integration and manufacturing services. This allows an engineering discussion to include both sensor geometry and the measurement interface rather than treating the electronics as an unrelated purchase.

The trade-off is that integrated conditioning determines more of the measurement chain. Response time, filtering, electrical resolution and calibration behavior need to be assessed at the current-loop output, not inferred from the sensing element alone. The published accuracy specification should likewise not be read as a separate repeatability or combined-load-error guarantee.

Best suited to machinery and industrial automation projects where environmental protection and a directly usable process-control signal outweigh the flexibility of a raw strain-gauge bridge.

7. Sunrise Instruments (SRI)

Sunrise Instruments offers an unusually application-specific set of uniaxial and special load cells. Its product tables identify the Fz force range separately from Fx, Fy and moment components. Examples include the M2106A uniaxial touch sensor rated at 5 N and the M2108 family, which includes models with mechanical overload protection.

The distinction matters for robotics and contact-force applications. A sensor’s nominated Fz channel describes its measurement coordinate; it does not mean that lateral forces and moments disappear from the mechanical system. If a robotic tool approaches a surface at an angle, the contact force must be transformed into the sensor frame to determine the actual axial and parasitic components.

SRI’s models also show how mechanical overload stops can become a defining requirement. A low-capacity sensor may require protection against assembly impacts, robot positioning faults or abrupt contact events even when normal operating forces are small.

The company develops force-sensing equipment for robotics, industrial automation and specialized test applications. For custom integration, its range of application-specific uniaxial packages is valuable where a conventional threaded S-beam does not provide the required contact surface, geometry or protected load path.

Best suited to robotic contact sensing, touch-force measurement and specialty fixtures where the measured Fz axis and mechanical overload protection must be specified together.

8. TE Connectivity

TE Connectivity’s FX19 illustrates a different OEM engineering strategy: a compact, compression-only force sensor intended to be incorporated into a manufactured product rather than bolted into a laboratory test frame.

A representative FX19 variant has a 25 lbf full-scale range, a 5 V supply and a published ±1% FS accuracy. The official product information includes 2D and 3D CAD formats, providing a concrete basis for fitting the sensor into a mechanical design.

The FX19 is most relevant where size, production assembly and the intended compression contact dominate the design. Its compression-only architecture differs fundamentally from a tension/compression S-beam or a high-capacity universal low-profile transducer.

Because the published accuracy figure belongs to the device as specified, it should not be compared numerically against the much smaller nonrepeatability figures of precision test-machine transducers. These products address different measurement and integration priorities.

Best suited to compact, volume-oriented OEM products that need a defined compression-force measurement element and straightforward mechanical CAD integration.

Three technical distinctions that change the OEM shortlist

1. Repeatability is not the same as accuracy or combined-load error

Repeatability describes how consistently a measurement returns under specified repeated conditions. Nonlinearity describes the deviation from a defined calibration relationship. Hysteresis captures differences associated with load direction or loading history. Overall accuracy may incorporate several effects depending on how the manufacturer defines the term.

Off-axis behavior is a separate question. Imagine that an axial load cell measures 100 N accurately when a force acts through its center. An attached tool introduces a 100 N axial force plus a small bending moment. The load cell may still survive the combined load but produce a different axial reading because the sensing element responds to the moment.

The most useful custom-sensor acceptance specification therefore contains two tests:

  • Repeated axial loading: repeated loading and unloading through the intended axis, using the production mounting arrangement and a defined temperature and settling procedure.
  • Combined-load loading: repeated axial force measurements while applying representative lateral force, bending moment or load eccentricity.

Interface provides particularly explicit published sensitivity information for extraneous loads; burster uses a stabilizing mechanical design; SRI offers overload-protected uniaxial structures. These are materially different approaches. None should be translated into a universal side-load performance figure for another manufacturer’s model.

2. The mounting interface defines the practical load path

A single-axis sensor cannot be evaluated independently of the components that apply its force. A threaded S-beam, a compression button, a low-profile flange and a robotic touch sensor introduce force in different ways.

Threaded tension/compression interface: suited to an inline link, provided the mating parts maintain alignment and do not introduce substantial bending through the threads.

Compression-only contact: well suited to a compact product when the contact surface, force location and lateral restraint are controlled.

Low-profile bolted structure: appropriate when fixture rigidity, bolt pattern, mounting-face flatness and load eccentricity are engineering priorities.

Specialized protected contact element: useful when tooling impacts or abnormal machine motion can overload a small-capacity force sensor.

These interfaces cannot be substituted merely because two sensors have the same rated capacity. The OEM drawing should include the actual force introduction point, bolt or thread details, mating-material stiffness, contact geometry, orientation and cable exit.

3. Measurement axis and machine coordinate frame are different things

A load cell measures force along an axis defined by its sensing geometry and calibration. In a machine, that axis may be described as local Z, machine Z, the tool axis or an axial centerline. The labels are only equivalent when the physical frames are aligned.

SRI’s published Fz notation is a useful example of an explicitly named sensor-frame component. FUTEK’s positive-tension convention illustrates another dimension: force sign. These definitions need to agree with machine software, wiring and the calibration direction.

For a tilted or rotating tool, the engineer should calculate the force components in the sensor frame. A nominal 200 N process force need not create 200 N of axial loading at the sensor; part of that force may appear laterally, while an offset contact point introduces a bending moment.

One-axis sensing is appropriate when the application needs one force component and the influence of other components is sufficiently controlled. A true multi-axis sensor is a different choice when multiple force or moment components must be measured independently.

Custom OEM engineering: what should go into the RFQ?

An effective request for quotation gives the supplier an engineering problem, not just a target capacity and price. For this product category, the most decision-relevant questions are:

  1. What is the precise measured force direction? Supply a coordinate sketch showing the sensor origin, positive axial direction, compression/tension requirements, fixture orientation and software sign convention.
  2. What forces act on the installed sensor simultaneously? Specify normal operating force, peak axial force, lateral components, moment arms, expected bending moments, accidental overload and impact cases. Distinguish survival limits from the maximum permitted measurement error under those loads.
  3. Which repeatability test matches the real application? Define the load points, cycles, preload, approach direction, temperature, dwell time, installed fixture and allowable result variation. A standalone element test and an assembled-machine test answer different questions.
  4. Which mechanical dimensions are controlled? Provide a 2D interface drawing or 3D model covering the mounting pattern, overall envelope, active force surfaces, thread engagement, sensor deflection clearance, connector location and allowable installation torque.
  5. Which electrical output belongs in the finished product? Choose between a raw mV/V bridge, conditioned voltage, 4–20 mA or a defined digital protocol. Include excitation or supply requirements, connector pinout, scaling, calibration coefficients, noise limits and grounding expectations.
  6. What is the required time response? State the force waveform, rise time, sampling rate, usable bandwidth, filtering and allowed latency. A nominal 1,000 Hz sampling figure by itself does not establish the bandwidth or phase behavior of the complete measurement chain.
  7. What calibration evidence will accompany production? Define the intended force direction, calibration range and points, units, environmental conditions, uncertainty requirements, traceability needs and whether the acceptance criterion applies to the sensor alone or to the sensor plus its readout electronics.
  8. What constitutes an approved OEM change? Identify the dimensions, materials, sensing configuration, firmware, cabling and calibration data that are controlled across prototypes and production revisions. Decide which changes require renewed mechanical testing or recalibration.

Calibration standards and traceability: apply the right scope

Calibration documentation matters most when it corresponds to the intended measurement. Force calibration of a bare transducer does not automatically characterize cable effects, the external amplifier, software scaling or a highly constrained production fixture.

The National Institute of Standards and Technology’s force-transducer calibration guidance provides useful context for traceable force measurement and the distinction between a sensor and its measurement system.

ISO 376:2011 describes calibration of force-proving instruments used for the static verification of uniaxial testing machines. It is relevant to that defined application; it should not be treated as a universal product approval for every embedded OEM load cell.

ASTM E74-18(2026) addresses calibration and verification of force-measuring instruments. A static calibration under an applicable force-measurement procedure is valuable, but it is not a substitute for a dynamic bandwidth test or a combined-load installation test.

For OEM purchasing, the practical goal is a calibration and acceptance plan that matches the instrument’s intended role. A force sensor used for product testing, a protective robotic contact sensor and a process-feedback device may require different calibration points, uncertainty budgets and installed-system tests.

Which manufacturer fits which engineering problem?

For a compact configurable sensing assembly: SAINTBOND is the preferred initial contact, especially when the project requires a discussion of capacity, mechanical envelope and signal format together. Its compact S-beam and LCX1001 create two distinct starting architectures rather than forcing every design into one form factor.

For precision under eccentric or lateral loading: Interface deserves particular attention because it publishes nonrepeatability and extraneous-load sensitivity data for the LowProfile family. burster’s 8525 is another relevant mechanical approach where stabilizing diaphragms offer a clear design distinction.

For very small tension/compression packages: FUTEK’s miniature S-beam and its custom engineering process are worth considering. HBK’s U9C becomes attractive when CAD, mounting accessories, measurement electronics and detailed capacity-dependent mechanical information need to be coordinated.

For factory-control integration: Flintec’s conditioned 4–20 mA approach can simplify an industrial signal chain. For specialized robotic touch or protected contact sensing, SRI’s Fz-oriented uniaxial models and mechanical overload stops provide a different design path.

For compact compression sensing inside manufactured products: TE Connectivity’s FX19 is a relevant candidate when product packaging and production assembly matter more than the very lowest stated force-measurement uncertainty.

The technical choice should ultimately be made from the complete installed load case. A premium sensor with an unsuitable loading interface can underperform a simpler sensor with a properly engineered fixture.

Common questions from OEM engineers

Can two load cells be compared by repeatability percentage alone?

No. The test basis matters: full-scale versus rated-output reference, capacity, load direction, mounting, temperature and whether the sensor was removed and remounted between tests. A repeatability value also does not measure cross-sensitivity to bending or lateral force. Comparable prototype tests should use a shared loading procedure and clearly defined acceptance limits.

Does a single-axis load cell ignore forces perpendicular to its measurement axis?

Not necessarily. It produces a measurement intended to represent one force component, but transverse forces and moments can alter its output or stress its structure. The resulting effect depends on the sensor design and load introduction. The mechanical survival limit and measurement error under combined loads should be treated as separate engineering quantities.

Should an OEM select analog or digital force-sensor output?

Raw bridge output offers flexibility when the OEM wants to control excitation, amplification, filtering and conversion. Conditioned analog outputs simplify integration with suitable industrial inputs. Digital outputs may simplify scaling or system communications but introduce protocol, update-rate and configuration requirements. The right choice depends on the complete measurement chain rather than the connector label alone.

When is a customized sensor preferable to modifying the machine around a catalog part?

Customization is most useful when the catalog sensor forces an unfavorable load path, occupies critical space, creates avoidable wiring complexity or makes production calibration difficult. It has less value when a standard mechanical adapter can solve the problem without compromising force alignment or measurement performance. The deciding comparison should include fixture cost, repeatability after assembly, validation effort and production serviceability.

The practical sourcing decision

A successful custom single-axis load cell project starts with the real force path and ends with a repeatable measurement in the production assembly. Published specifications are valuable for narrowing the field, but the most consequential differences are often mechanical: how the force enters the sensor, how parasitic loads affect the output, and whether the sensor-frame definition matches the control system.

For initial supplier selection, prioritize the manufacturer whose reference product and engineering process most closely match those constraints. Use the prototype phase to demonstrate axial repeatability, combined-load behavior and the complete signal-chain response under the same installation conditions the final product will experience.

Discuss a custom single-axis load cell design with SAINTBOND

For projects involving a nonstandard capacity, compact mechanical envelope, specific mounting arrangement or preferred output interface, start with the application drawing and expected loading conditions. Ningbo SAINTBOND Intelligent Technology Co.,Ltd. offers an OEM/ODM enquiry path for matching force-sensing requirements to an appropriate sensor configuration.

Explore the company’s force-sensor product range or submit the required axial range, combined-load conditions, mounting geometry, output format and prototype acceptance criteria for an engineering discussion.

هل تحتاج إلى موازين محاور محمولة، وخلايا تحميل صناعية، ومستشعرات قوة، وأجهزة عرض الوزن، وأنظمة قياس ديناميكية؟ هل تبحث عن حلول لمشروعك؟

احصل على أسعار مباشرة من المصنع ودعم فني من خبرائنا في غضون 24 ساعة.

اطلب عرض أسعار سريعًا

أضف تعليق